﻿<?xml version="1.0" encoding="utf-8" standalone="no"?><Search><pages Count="119"><page Index="1" isMAC="true"><![CDATA[WaveRunner GP GP800YOWNER’S/OPERATOR’S MANUALU.S.A.EditionYAMAHA MOTOR CORPORATION, U.S.A.READ THIS MANUAL CAREFULLY BEFORE OPERATION!LIT-18626-03-86●]]></page><page Index="2" isMAC="true"><![CDATA[EJU00270Thank you for choosing a Yamaha Water Vehicle. This Owner’s Manual contains information you will need for proper oper- ation, maintenance, and care. A thorough understanding of these simple instructions will help you to obtain maximum enjoy- ment from your new Yamaha. If you have any questions about the operation or maintenance of your water vehicle, please consult a Yamaha dealer.YAMAHA MOTOR CO., LTD.Because Yamaha has a policy of continu- ing product improvement, this product may not be exactly as described in this Owner’s Manual. Specifications are sub- ject to change without notice.This manual should be considered a per- manent part of this water vehicle and should remain with it even if the vehicle is subsequently sold.EJU00271aTO THE OWNERIMPORTANT MANUAL INFORMATION:In this manual, information of particular importance is distinguished in the follow- ing ways:The Safety Alert Symbol means Q ATTENTION! BECOME ALERT!YOUR SAFETY IS INVOLVED!wFailure to follow WARNING instructions could result in severe injury or death to the machine operator, a bystander, or a person inspecting or repairing the water vehicle.cCA CAUTION indicates special precautions that must be taken to avoid damage to the water vehicle.NOTE:A NOTE provides key information to make procedures easier or clearer.EWaveRunner GP800 OWNER’S/OPERATOR’S MANUAL ©1999 by Yamaha Motor Co., Ltd. 1st Edition, June 1999All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited. Printed in U.S.A.P/N LIT-18626-03-86]]></page><page Index="3" isMAC="true"><![CDATA[EJU00273CONTENTSGENERAL AND SAFETY INFORMATION112233445565FEATURE AND FUNCTIONSOPERATION AND RIDINGMAINTENANCE AND CARETROUBLESHOOTING AND EMERGENCY PROCEDUREINDEXREAD THIS OWNER’S / OPERATOR’S MANUAL CAREFULLY BEFORE OPERATING YOUR WATER VEHICLE.]]></page><page Index="4" isMAC="true"><![CDATA[EJU00274Chapter 1 1 GENERAL ANDSAFETY INFORMATION 1EIDENTIFICATION NUMBER 2 RECORDS..................................................1-1 PRI-I.D. number ..................................1-1Hull identification number (H.I.N) ....1-1 Engine number...................................1-1EMISSION CONTROL INFORMATION...1-2 3IMPORTANT LABELS ..............................1-3 Location...............................................1-3 Labels ..................................................1-41SAFETY INFORMATION .........................1-7 Limitations on who may 4 operate the vehicle ............................1-7 Cruising limitations............................1-8 Operational requirements.................1-9 Hazard information ..........................1-11 Water vehicle characteristics ..........1-12RULES OF THE ROAD ...........................1-13 5 Steering and sailing rules andsound signals ...................................1-13 Rules when encountering vessels..1-14 Other special situations...................1-15TO GET MORE BOATING SAFETY INFORMATION.......................................1-17 6ENJOY YOUR WATER VEHICLE RESPONSIBLY........................................1-17FUEL REQUIREMENTS..........................1-18 1 Gasoline (petrol)...............................1-18 Engine oil ..........................................1-18111]]></page><page Index="5" isMAC="true"><![CDATA[EEJU00699IDENTIFICATION NUMBER RECORDSRecord your Primary identification (PRI- ID) number, Hull identification number (HIN) and Engine serial number in the spaces provided, to assist you in ordering spare parts from your Yamaha water vehicle dealer. Also record and keep these ID numbers in a separate place in case your water vehicle is stolen.EJU00281aPRI-I.D. NUMBERThe PRI-ID number is stamped on a label 1 attached to the deck under the rear seat.EJU00286aHULL IDENTIFICATION NUMBER(H.I.N)The H.I.N. is stamped on a plate 2 attached to the stern.EJU00288aENGINE NUMBERYAMAHA MOTOR CO., LTD. MADE IN JAPANPAYS D’ORIGINE JAPONThe engine serial number is stamped on a label 3 attached to the crankcase.qGU0-001wGU0-002eGU0-0031-1]]></page><page Index="6" isMAC="true"><![CDATA[EqwRU0625EJU00631aEMISSION CONTROL INFORMATIONThis engine conforms to 2000 U.S. Envi- ronmental Protection Agency (EPA) regu- lation for marine SI engines.8 Approval label of Emission control certificateThis label is attached to the electrical box. 1 Emission control information labelEMISSION CONTROL INFORMATIONENGINE FAMILY :THIS ENGINE CONFORMS TO 2000 U.S. EPA REGULATIONS FOR MARINE SI ENGINES.SPARK PLUG GAP (mm) : TROLLING SPEED : rpm8 Manufactured date labelThis label is attached to the muffler box.2 Manufactured date labelFELs : g/kw-hrManufactured:1-2]]></page><page Index="7" isMAC="true"><![CDATA[EJU00293LOCATIONIMPORTANT LABELSw!2q!4u!5!0 yRU062RU061*!1RU063i!3 eo1-3trE]]></page><page Index="8" isMAC="true"><![CDATA[qGP8-U411A-00WARNINGDo not add gasoline to the oil tank. Fire or explosion could result.YAMAHA GD0-U418F-00ELABELS Warning labelswert1-4]]></page><page Index="9" isMAC="true"><![CDATA[EyuCaution labelsio!0!1WARNINGDo not touch or remove electrical parts when starting or running the engine.YAMAHA 6 R 7 - 8 3 6 2 3 - 4 0GP8-U411A-001-5]]></page><page Index="10" isMAC="true"><![CDATA[X AEOther labels!2 !3!4!5NGK BR8ES1-6RECOMMENDED OILY AMALUBE 2-W or an equivalent TC-W3 certified outboard oil.YAMAHA GU0-U418J-00REIS NH TU EIT RG MN TFREICOME P]]></page><page Index="11" isMAC="true"><![CDATA[INFORMATION Many states have minimum age and education requirements. Always checkstates and all applicable local boating laws that apply to you before you oper- ate the water vehicle.EA responsible adult must supervise SAFETY operation of this vehicle by minors.EJU00686QWhen you operate your Yamaha Water Vehicle, you must know and practice the following for your safety:8 Before operating the water vehicle, readthis entire manual, the Riding Practice Tips, the Riding Instruction card and all warning labels on the water vehicle. Reading these materials should give you an understanding of the vehicle and its operation.Never allow anyone to operate this water vehicle until they too have read this Owner’s Manual, the Riding Prac- tice Tips, the Riding Instruction card and all warning labels.8 This product emits exhaust gases which contain carbon monoxide, a colorless, odorless gas which may cause brain damage or death when inhaled. Symp- toms include nausea, dizziness, and drowsiness. Operate the vehicle in an open area.EJU00300LIMITATIONS ON WHO MAY OPERATE THE VEHICLEEJX100108 This vehicle is recommended only for operators 16 and older with a valid motor vehicle license.Even though a motor vehicle operator’s license is not required for water vehicle operation in most states, it is one indi- cator that the operator has previously demonstrated a reasonable degree of maturity, responsibility, and good judg- ment.K20028 Your water vehicle is designed to carry the operator and only one passenger, as long as the total weight does not exceed the maximum load capacity.ATTENTION:Maximum vehicle load capacity: 160 kg (353 lb)Includes weight of operator, passenger, and any cargo.8 Do not try to ride with a passenger until you have considerable practice riding alone. Operating with a passenger requires more skill. Take the time to become accustomed to the handling characteristics of the vehicle with a pas- senger before trying any difficult maneuvers.1-7]]></page><page Index="12" isMAC="true"><![CDATA[EJU00613CRUISING LIMITATIONSEJX240118 Do not jump boat wakes or followanother boat or watercraft too closely.You increase your risk of colliding withanother boat, which could result insevere injury or death. Do not jumpwaves, wakes, or any objects. You risksevere impact injuries. Jumping canalso cause damage to the water vehicle.EJX250108 Never ride in water that is less than 60 cm ( 2 feet ) deep. You increase your chance of hitting an underwater obsta- cle. You could be injured.EJX21010E60 cm (2 ft.)K1052K20038 Do not operate the vehicle in rough water, bad weather or when visibility is poor; this may lead to an accident caus- ing injury or death. Be alert to the possi- bility of adverse weather. Take note of weather forecasts and the prevailing weather conditions before setting out on your water vehicle.EJX230108 As with any water sport, you should not ride your water vehicle without some- one else near by. If you ride further than swimming distance from shore, you should be accompanied by another boat or watercraft. It’s good, commonsense!EJX220108The maximum performance potential of this watercraft is not suitable for all con- ditions. Consider water conditions, weather, boat traffic and other potential obstacles, speed limits and other local laws, and your abilities before attempt- ing to travel at higher speeds. Operate the watercraft no faster than justified by these conditions.8 Do not operate water vehicle after sun- set or before dawn. It is not equipped with lighting required for night opera- tion. You risk collision with anotherboat which could cause injury or death.EJX20010K10011-8]]></page><page Index="13" isMAC="true"><![CDATA[EEJU00616aOPERATIONAL REQUIREMENTSEJX160108 Operating your water vehicle requires skills acquired only through practice over a period of time. Take the time to learn the basic operating techniques well, before attempting more difficult maneuvers.EJX112118 Both operator and a passenger must always wear a U.S. Coast Guard approved personal flotation device (vest-type) because of the drowning hazards associated with water sports.8 Both operator and a passenger should wear water shoes to help protect feet from objects hidden under water. Wear- ing gloves can also help protect hands from abrasions.EJX119118 Wind, water, and glare from the sun may get in your eyes while you operate your water vehicle, reducing your abili- ty to see. You may want to consider wearing eye protection such as sun- glasses or goggles while riding. Some may find, however, that eye protection obstructs or distorts their vision, and distracts from operation. Only you know the circumstances in which you operate your water vehicle, so only you can decide if the benefits of eye protec- tion outweigh the potential hazards.EJX119208 If you wear prescription lenses, consid- er measures to secure them against loss while riding. For example, some goggles are designed to be worn over glasses or contact lenses. Restraining straps for glasses are also made which are designed to float if your glasses should fall in the water.EJX121108Helmets meeting Snell or DOT stan- dards are required for IJSBA-sanctioned races. You must decide whether to wear a helmet while you ride recreationally. A helmet could help protect you in cer- tain kinds of accidents. You should also know that a helmet could injure you in some other riding conditions.A helmet is designed to provide some head protection. Although helmets can- not protect against all foreseeable impacts, a helmet might reduce your injuries in a collision with a boat or other obstacle.tr weqKA0011 U.S. Coast Guard-approved personal flotation device2 Wetsuit3 Water shoes4 Gloves5 Eye protection8 Strong streams of water from the jet nozzle, or impact with the water surface can be dangerous. Both operator and a passenger must wear wetsuits. Normal swimming attire may not adequately protect you. A wetsuit will help protect against internal injuries to orifices (rec- tum and vagina) from strong jet streams, and from impact with the water surface. Wetsuits also help pro- tect against hypothermia (low bodytemperature) and abrasions.EJX117101-9]]></page><page Index="14" isMAC="true"><![CDATA[EA helmet may have potential safety haz- ard, as well. A helmet could catch the water during a fall into the water. This is commonly called “bucketing”. The resulting strain on your neck could cause choking, severe and permanent neck injuries, or death. A helmet could also increase the risk of an accident if it reduces your vision or hearing, or if it distracts you or increases your fatigue. How should you decide if a helmet’s potential safety benefits outweigh its potential risks for you? Consider your particular riding conditions. Consider factors such as your riding environment and your riding style and ability. Also consider the likelihood of traffic conges- tion, and the water surface conditions. If you decide to wear a helmet based upon your riding circumstances, choose one carefully. Look for a helmet designed for personal watercraft use, if possible. Consider a helmet meeting Snell or DOT standards. If you will be engaging in closed-course competition, follow the helmet requirements of the sanctioning organization.EJX10210,EJX104108 NEVER ride the vehicle after consumingalcohol or taking drugs.EJX910108 For reasons of safety and proper care,always perform the pre-operationchecks on page 3-3 before riding.EJX151108 The operator and a passenger should always keep both feet on the footrest floor when the vehicle is in motion. If you lift your feet, you increase your chances of losing your balance, and your feet could hit objects outside the water vehicle. Do not give a ride to a child whose feet cannot reach the footrest floor.The passenger should always firmly grasp the operator’s waist.EJX10310K20048 If you are pregnant or in poor health,ask your doctor’s advice on whether itis safe for you to ride this water vehicle.EJX900108 Do not attempt to modify this water vehicle!Modifications to your machine mayreduce safety and reliability, and maymake the vehicle unsafe or illegal for use.EJX710108 The operator should always attach the engine stop switch lanyard (cable) to his left wrist so that the engine will stop if the operator falls off.Be sure the lanyard is not wrapped around the handlebar or tangled in the controls which would prevent the lan- yard from pulling away.EJX71110KA0021-10]]></page><page Index="15" isMAC="true"><![CDATA[8 To prevent accidental starting of the engine, always remove the lock plate from the engine stop lanyard switch when the engine is not running.8 This water vehicle is included in the Class A inboard boat classification of the U.S. Coast Guard. A water craft of this type MUST carry a fire extinguisher of a B-1 classification, with a capacity of two pounds or more when navigating in waters under Coast Guard jurisdic- tion. In addition, most state and local boating laws also require that the carry a USCG-approved extinguisher wherev- er it is operated.EeqwGP7-079KA0031 Engine stop lanyard switch 2 Engine stop switch lanyard 3 Lock plate8 Always watch carefully for swimmers. Stay away from swimming areas. Swimmers are hard to see and you could accidentally hit someone in the water.EJX140108 Avoid being hit by another boat! You should always take the responsibility to watch for traffic, other boaters may not be watching for you. If they don’t see you, or you maneuver more quickly than other boaters expect, you risk a collision.Maintain a safe distance from other boats or watercraft, and also watch for boat’s ski ropes or fishing lines. Obey the “Rules of the Road” (see page 1-13 ~1-16), and be sure to check behind youbefore making a turn.EJX15020EJU00313HAZARD INFORMATIONEJX420108 When transporting or storing your water vehicle, always place the fuel cock in the “OFF” position. Otherwise, it is possible for gasoline to overflow from the carburetor.GP7-0161-11]]></page><page Index="16" isMAC="true"><![CDATA[EEJU00314aWATER VEHICLE CHARACTERISTICS8 Keep hands, feet, hair, and all other parts of your body and clothing away from jet intake on the bottom of the hull while engine is running because they could be caught in the intake.Stop the engine and remove the lock plate from the engine stop lanyard switch before removing any debris or weeds which may have collected around the jet intake.Never insert any object in the jet pump outlet. Severe injury or death could result from coming in contact with the rotating parts of the jet pump.K10538 Jet thrust turns the water vehicle. If you are going faster than trolling speeds (the lowest maneuvering speed), you must use throttle to turn. If you release the throttle completely, you cannot turn-even if you turn the handlebars. Practice turning in an open area without obstructions until you have a good feel for this maneuver.8Yamaha Water Vehicles are water-jet propelled. The jet pump is directly con- nected to the engine. This means that jet thrust will produce some vehicle movement whenever the engine is run- ning. There is no “neutral” position.8 Boats, including your water vehicle, do not have brakes. Release the throttle or stop the engine to slow down. Remem- ber, however, that you have no steeringcontrol without throttle.EJX79011GP7-0291-12]]></page><page Index="17" isMAC="true"><![CDATA[EJU00319STEERING AND SAILING RULES AND SOUND SIGNALSWhenever two vessels on the water meet one another, one vessel has the right-of- way; it is called the “stand-on” vessel. The vessel which does not have the right- of-way is called the “give-way” or “bur- dened” vessel. These rules determine which vessel has the right-of-way, and what each vessel should do.Stand-On VesselThe vessel with the right-of-way has the duty to continue its course and speed, except to avoid an immediate collision. When you maintain your direction and speed, the other vessel will be able to determine how best to avoid you.Give-Way VesselThe vessel which does not have the right- of-way has the duty to take positive and timely action to stay out of the way of the Stand-On vessel. Normally, you should not cross in front of the vessel with the right-of-way. You should slow down or change directions briefly and pass behind the other vessel. You should always move in such a way that the operator of the other vessel can see what you are doing.“The General Prudential Rule”This rule is called Rule 2 in the Interna- tional Rules and says,‘In obeying and construing these rules due regard shall be had to all dangers of navigation and collision, and to any spe- cial circumstances, which may render a departure from the above rules necessary in order to avoid immediate danger.’RULES OF THE ROADYour Yamaha water vehicle is legally con- sidered a power boat. Operation of the water vehicle must be in accordance with the rules and regulations governing the waterway on which it is used.Just as there are rules which apply when you are driving on streets and highways, there are waterway rules which apply when you are riding your water vehicle. These rules are used internationally, and are also enforced by the United States Coast Guard and local agencies. You should be aware of these rules, and fol- low them whenever you encounter anoth- er vessel on the water.Several sets of rules prevail according to geographic location, but are all basically the same as the International Rules of the Road. The rules presented here in your Owner’s Manual are condensed, and have been provided for your convenience only. Consult your local U.S. Coast Guard Aux- iliary or Department of Motor Vehicles for a complete set of rules governing the waters in which you will be riding your water vehicle.wDo not operate water vehicle after sunset or before dawn. It is not equipped with lighting required for night operation. You risk collision with another boat which could cause injury or death.E1-13]]></page><page Index="18" isMAC="true"><![CDATA[EIn other words, follow the standard rules except when a collision will occur unless both vessels try to avoid each other. If that is the case, both vessels become “Give-Way” vessels.RULES WHEN ENCOUNTERING VESSELSThere are three main situations which you may encounter with other vessels which could lead to a collision unless the Steer- ing Rules are followed:Meeting (you are approaching another vessel head-on)Crossing (you are traveling across the other vessel’s path)Overtaking (you are passing or being passed by another vessel)In the following illustration, your water vehicle is in the center. You should give the right-of-way to any vessels shown in the white area (you are the Give-Way ves- sel). Any vessels in the shaded area must yield to you (they are the Give-Way ves- sels). Both you and the meeting vessel must alter course to avoid each other.MeetingIf you are meeting another power vessel head on, and are close enough to run the risk of collision, neither of you has the right-of-way! Both of you should alter course to avoid an accident. You should keep the other vessel on your port (left) side. This rule doesn’t apply if both of you will clear one another if you continue on your set course and speed.KA032CrossingWhen two power driven vessels are crossing each other’s path close enough to run the risk of collision, the vessel which has the other on the starboard (right) side must keep out of the way of the other. If the other vessel is on your right, you must keep out of its way; you are the Give-Way vessel. If the other ves- sel is on your port (left) side, remember that you should maintain course and direction, provided the other vessel gives you the right-of-way as it should.KA031STAND-ON VESSELGIVE-WAY VESSELKA0331-14]]></page><page Index="19" isMAC="true"><![CDATA[EOvertakingIf you are passing another vessel, you are the “Give-Way” vessel. This means that the other vessel is expected to maintain its course and speed. You must stay out of its way until you are clear of it. Like- wise, if another vessel is passing you, you should maintain your speed and direction so that the other vessel can steer itself around you.OTHER SPECIAL SITUATIONSThere are three other rules you should be aware of when riding your water vehicle around other vessels.Narrow Channels and BendsWhen navigating in narrow channels, you should keep to the right when it is safe and practical to do so. If the operator of a power-driven vessel is preparing to go around a bend that may obstruct the view of other water vessels, the operator should sound a prolonged blast on the whistle (4 to 6 seconds). If another vessel is around the bend, it too should sound the whistle. Even if no reply is heard, however, the vessel should still proceed around the bend with caution. If you navi- gate such waters with your water vehicle, you will need to carry a portable air horn, available from local marine supply stores.Fishing Vessel Right-of-WayAll vessels which are fishing with nets, lines or trawls are considered to be “fish- ing vessels” under the International Rules. Vessels with trolling lines are not considered fishing vessels. Fishing ves- sels have the right-of-way regardless of position. Fishing vessels cannot, howev- er, impede the passage of other vessels in narrow channels.Sailing Vessel Right-of-WaySailing vessels should normally be given the right-of-way. The exceptions to this are:1. When the sailing vessel is overtaking the power-driven vessel, the power- driven vessel has the right-of-way.2. Sailing vessels should keep clear of any fishing vessel.3. In a narrow channel, a sailing vessel should not hamper the safe passage of a power-driven vessel which can navigate only in such a channel.Reading Buoys and Other MarkersThe waters of the United states are marked for safe navigation by the lateral system of buoyage. Simply put, buoys and markers have an arrangement of shapes, colors, numbers and lights to show which side of the buoy a boater should pass on when navigating in a par- ticular direction. The markings on these buoys are oriented from the perspective of being entered from seaward (the boater is going towards the port). This means that red buoys are passed on the starboard (right) side when proceeding from open water into port, and black buoys are to port (left) side. When navi- gating out of port, your position with respect to the buoys should be reversed; red buoys should be to port and black buoys to starboard.Many bodies of water used by boaters are entirely within the boundaries of a partic- ular state. The Uniform State Waterway Marking System has been devised for these waters. This system uses buoys and signs with distinctive shapes and colors to show regulatory or advisory informa-1-15]]></page><page Index="20" isMAC="true"><![CDATA[Etion. These markers are white with black Remember, markings may vary by geo- letters and orange boarders. They signify graphic location. Always consult local speed zones, restricted areas, danger boating authorities before riding your areas, and general information. water vehicle in unfamiliar waters." 6""5"" 3""1"C " 1"N " 2"BUOY COLOR CODEBLACKREDGREEN" 7"RB "L" orRG "L"1oldnew1"4""2" "4" "6"LIGHTED BUOY (Starboard Hand)`Even number,increasing toward head of naviga- tion. Leave to starboard (right) proceeding up- stream."A"White Light Red LightOR" 2"Proceeding toward head of navigation from seawardMAIN CHANNEL BUOYS"1" "3" "5" "7"LIGHTED BUOY (Port Hand)`Odd number. increasing toward head of naviga- tion.Leave to port (left) proceeding upstream.White Light Green LightORoldnew22"A"LIGHTED SAFE WATER BUOYNo number. Marks midchannel, pass on either side. Letter has no lateral significance, used for identification and location purposes.SECONDARY CHANNEL BUOYSSTARTS NEW NUMBERING SYSTEMTop Mark White Light White LightAC "1" CAN BUOYOdd number. Leave to port.OR11oldnewORAoldnewRB "L" RG "L"LIGHTED PREFERRED CHANNEL TO PORT BUOYNo number. Topmost band red - preferred channel is to left of buoy. Letter has no lateral significance, used for identification and location purposes.N "2"NUN BUOYEven number. Leave to starboard2Red or White LightRed LightnewoldLLNo change1-16KA034MAIN CHANNELSECONDARY CHANNEL]]></page><page Index="21" isMAC="true"><![CDATA[EEJU00320TO GET MORE BOATING SAFETY INFORMATIONBe informed about boating safety. Addi- tional publications and information can be obtained from many organizations, including the following.United States Coast GuardConsumer Affairs Staff (G-BC)Office of Boating, Public, and Consumer AffairsU.S. Coast Guard Headquaters Washington, D.C. 20593-0001Boating Safety Hotline: 1-800-368-5647Personal Watercraft Industry Association(PWIA)401 N. Michigan Ave. Chicago, IL 60611Personal Watercraft Riders Association(PWRA)401 N. Michigan Ave. Chicago, IL 60611EJU00322ENJOY YOUR WATER VEHICLE RESPONSIBLY8 You share the areas you enjoy when riding your Water Vehicle with others and with nature. So your enjoyment includes a responsibility to treat these other people, and the lands, waters, and wildlife with respect and courtesy.8 Whenever and wherever you ride, think of yourself as the guest of those around you. Remember, for example, that the sound of your Water Vehicle may be music to you, but it could be just noise to others. And the exciting splash of your wake can make waves others wont enjoy. Avoid riding close to shoreline homes and waterfowl nesting areas or other wildlife areas, and keep a respect- ful distance from fishermen, other boats, swimmers, and populated beach- es. When travel in areas like these is unavoidable, ride slowly and obey all laws.8 Remember that pollution can be harm- ful to the environment. Do not refuel or add oil where a spill could cause dam- age to nature. Remove your Water Vehicle from the water and move it away from the shoreline before refuel- ing. And keep your surroundings pleas- ant for the people and wildlife that share the waterways: do not litter!1-178 When yourespect andhelp ensureopen for the enjoyment of a variety of recreational opportunities.ride responsibly, with courtesy for others, you that our waterways stay]]></page><page Index="22" isMAC="true"><![CDATA[EJU00323aFUEL REQUIREMENTSGASOLINE(PETROL)wGASOLINE (PETROL) AND ITS VAPORS ARE HIGHLY FLAMMABLE AND EXPLO- SIVE!8 Do not smoke when refueling, andkeep away from sparks, flames, orother sources of ignition.8 Stop engine before refueling.8 Refuel in a well-ventilated area. Do notstand or sit on the water vehicle whilerefueling in case of fire.8 Take care not to spill gasoline (petrol).If gasoline (petrol) spills, wipe it up immediately with dry rags. Always properly dispose of gasoline-soaked rags.8 Avoid overfilling the fuel tank. Stop fill- ing when the fuel level just reaches the bottom of the filler tube. Do not fill up the filler tube because fuel expands as it warms up and could overflow.8 Tighten the filler cap securely after refueling.8 If you should swallow some gasoline (petrol), inhale a lot of gasoline (petrol) vapor, or get gasoline (petrol) in your eyes, get immediate medical attention.8 If any gasoline (petrol) spills onto your skin, immediately wash with soap and water. Change clothing if gasoline (petrol) spills on it.cCUse only fresh gasoline (petrol) that hasbeen stored in clean containers.ERecommended gasoline: Unleaded regular gasoline Minimum octane rating:86 (Pump octane number): (R+M)/2 90 (Research octane number)GasoholThere are two types of gasohol: gasohol containing ethanol and that containing methanol. Gasohol containing ethanol can be used if ethanol content does not exceed 10% and the fuel meets minimum octane ratings. Gasohol containing methanol is not recommended by Yamaha because it can cause fuel system damage or engines performance prob- lems.EJU00324aENGINE OILIf YAMALUBE 2-W is not available, anoth- er 2-stroke engine oil with a NMMA-certi- fied TC-W3 rating may be used.1-18Recommended oil: YAMALUBE 2-W]]></page><page Index="23" isMAC="true"><![CDATA[E– MEMO –]]></page><page Index="24" isMAC="true"><![CDATA[EJU00326Chapter 2 1 FEATURES ANDFUNCTIONS LOCATION OF MAIN1COMPONENTS.........................................2-1 2OPERATION OF CONTROLSAND OTHER FUNCTIONS.......................2-4Front seat ............................................2-4 Rear seat .............................................2-4 Front hood ..........................................2-5 3 Fuel tank filler cap ..............................2-6Fuel cock .............................................2-6 Engine stop switch ............................2-7 Engine stop lanyard switch ..............2-7 Choke knob .........................................2-8 Throttle lever ......................................2-8 Starter switch .....................................2-8 4 Cooling water pilot outlet..................2-9 Steering ...............................................2-9 Quick shift trim system (Q.S.T.S.) ..2-10 Overheat warning system...............2-11 Handgrips .........................................2-12 Bow eye, Rope holes, and Cleat.....2-12 Multifunctionmeter.........................2-13 5 Storage compartments ...................2-22 Yamaha adjustable sponson(Y.A.S.) ..............................................2-24161111]]></page><page Index="25" isMAC="true"><![CDATA[EJU00327EJD10010LOCATION OF MAIN COMPONENTSEo !0 !1 iu!2uty !8!7!6!5 !4 erwq!3 !9TK001A1 Cooling water pilot outletsCheck point of cooling water flowing.2 Bow eyeRope attachment point for transporting, mooring, or towing the water vehicle in an emergency.3 Front storage compartment4 Fire extinguisher compartment5 Front hood6 Choke knobPull knob when starting a cold engine.7 Rope holeRope attachment point for transporting, mooring.8 Fuel tank filler cap 9 Fuel cockSelect fuel flow from normal or reserve areaof the fuel tank, or shut off fuel flow.0 HandlebarsControl steering direction.q Footrest floorTo place feet for balance.w CleatRope attachment point for mooring only.e Intake grillePrevents debris from getting into the jet pump.r Speed sensort Seat storage compartmenty Rear seatu Front seati Grove compartmento Yamaha Adjustable Sponson (Y.A.S.)Changes maneuvering characteristic by adjusting the sponson angle.2-1]]></page><page Index="26" isMAC="true"><![CDATA[Ey tewqiurTK002Ao!0 oTK003A1 Engine stop switch lanyard (Cable) 6 By connecting to the stop switch and opera-tor will stop the engine if the operator falls 7 off the vehicle.2 Engine stop switchDepress to stop the engine. 83 Engine stop lanyard switchRemoving the lock plate makes to stop the engine and disable to start the engine. 94 Lock plateInsert the lock plate in the engine stop lan-yard switch to allow the engine to be start-ed. Remove the plate to stop the engine or 0 prevent it from starting.5 Quick Shift Trim System (QSTS) controller Controls thrust trim for different operating conditions.Starter switchDepress to start the engine.Multifunction meterShows engine speed and vehicle speed and some other conditions on the vehicle. Throttle leverControls the engine speed when accelerat- ing and decelerate.Drain plugsOpen to drain water in the bilge when the vehicle is on dry land. Tighten securely before launching craft.Steering jet nozzleChanges the direction of jet thrust according to handlebar position to steer the vehicle.2-2]]></page><page Index="27" isMAC="true"><![CDATA[E!1 qrewtoiuy!0TK004A1 Fuel tank2 Water separatorTo trap water from the air passage to thefuel tank.3 Fuel filterPrevents dust contained in fuel from getting into the engine.4 Oil tank5 SilencerTo help prevent water from getting into the engine and reduce the air intake noise.6 High tension cordDeliver electrical current to the spark plug.7 Spark plug/Spark plug cap 8 Electrical boxContains most electrical components,included fuse in this water resistant box.9 Battery0 Flush hose connector q Muffler box2-3]]></page><page Index="28" isMAC="true"><![CDATA[EqGP7-005EJU00328OPERATION OF CONTROLSAND OTHER FUNCTIONSEJU00334FRONT SEATThere is a seat latch under the rear seat. First remove the rear seat to reach the front seat latch lever, then remove the front seat.RemovalPull the front seat latch lever up, then lift the rear of the seat , and pull back.1 Front seat latch leverInstallationPosition the seat on the deck so the front projection of the seat fits under the stay on the deck. Then push the rear of the seat down until the seat locks latch.2 StayNOTE:Make sure the seat is firmly secured before riding.EJU00335EJD13510REAR SEATThere is a seat latch lever at the rear of the seat to remove the rear seat.RemovalPull the rear seat latch lever up, then lift the rear of the seat and pull back.1 Rear seat latch leverwGU0-006GP7-007qGP7-0082-4]]></page><page Index="29" isMAC="true"><![CDATA[EGP7-009InstallationPosition the seat on the deck so the front projections on the underside of the seat fits into the stays on the deck. Then push the rear of the seat down until the seat lock latches.NOTE:Make sure the seat is firmly secured before riding.GP7-010qGP7-011EJU00343aEJD15710FRONT HOODThe front food is secured by the latch 1. Pull up the latch lever and lift the food to open it.NOTE:Make sure the front food is firmly secured with the latch before riding.GP7-0122-5]]></page><page Index="30" isMAC="true"><![CDATA[EqGP7-013EJU00345EJD18010FUEL TANK FILLER CAPTo remove the fuel tank filler cap, turn it counterclockwise.1 Fuel tank filler capBe sure to tighten the cap securely beforeriding.EJU00704FUEL COCKThe fuel cock 1 supplies fuel from the fuel tank to the carburetor.The fuel cock has three positions;OFFWith the knob in this position, fuel does not flow. Always turn the knob to this position when the engine is not running.ONWith the knob in this position, fuel flows to the carburetor. Normal running is done with the knob in this position.RESIf you run out of fuel in the ”ON” posi- tion, turn the knob to this position to be able to continue for a short time. Remember to FILL THE TANK AT THE FIRST OPPORTUNITY.After refueling, return the fuel cock knob to the ”ON” position for further riding.q GP7-014GP7-0152-6]]></page><page Index="31" isMAC="true"><![CDATA[EqGP7-018EJU00705ENGINE STOP SWITCHThe engine can be stopped normally by pressing the red button 1.EJU00706aENGINE STOP LANYARD SWITCHThe engine can be also stopped if you fall off, or in case of an emergency, when the lock plate 1 attached to the lanyard 2 is pulled out from the engine stop lanyard switch 3.Should the lock plate be removed for any reason, the engine stops by itself.w8 Always attach the engine stop switch lanyard (cable) to your left wrist BEFORE starting the engine.8 To prevent accidental starting of the engine, always remove the lock plate from the stop switch when the engine is not running.NOTE:When the red button on the engine stop switch is pushed, without removing the lock plate, the ignition circuit opens and stops the engine immediately.qweGP7-017GP7-0192-7]]></page><page Index="32" isMAC="true"><![CDATA[EqGP7-020EJU00350aCHOKE KNOBPulling this knob supplies a rich fuel-air mixture required to start a cold engine. NOTE:Refer to “STARTING THE ENGINE” in the chapter 3 for proper operation.1 Choke knobEJU00351THROTTLE LEVERMoving the throttle lever toward the han- dlebar increases engine speed. When the throttle lever is released, it returns to its closed (idle) position through the action of a return spring.wBefore starting the engine, always check the operation of the throttle lever. It should move smoothly through its full range of operation, and should spring back to the idle position when released.1 Throttle leverEJU00353aSTARTER SWITCHTo start the engine, push the starter switch (green button) .NOTE:8 The engine will not start when the lock plate is removed from the engine stop switch. The starter motor will not turn.8 The engine will not start if the “LOCK” mode has been chosen. To set the mode to “START”, refer to the “PAD- LOC” function in the “MULTIFUNCTION METER” instructions.1 Starter switch 2-8qGP7-021q GP7-022]]></page><page Index="33" isMAC="true"><![CDATA[EJU00354aCOOLING WATER PILOT OUTLETThis watercraft is equipped with a cool- ingwater pilot outlets at left side of the hull. Check that water comes out of the outlets while the engine is running. If you do not see any water at the outlets, cool- ing water may not be circulating in the engine.In that case, stop the engine and check for the cause (refer to overheat warning sys- tem).NOTE:If the cooling water passages are dry it will take about 20 seconds to reach water at the outlet after starting the engine.EJU00356aSTEERINGYour water vehicle can be steered by turning the handlebars the same direction you wish to travel, to the right or left. When the handlebars are turned, the angle of the jet (output) nozzle at the stern is changed, and the change in direction of the nozzle changes the direction of the vehicle accordingly. Therefore, because only the strength of the jet-flow output can determine the speed and direction of a turn, the throttle must always be opened above idle when attempting a turn, except at trolling speed.1 HandlebarsEGU0-023qGP7-0242-9]]></page><page Index="34" isMAC="true"><![CDATA[EqwGP7-025EJU00360QUICK SHIFT TRIM SYSTEM (Q.S.T.S.)The trim angle of your water vehicle can be adjusted by operating the Q.S.T.S. Operating the trim shifting grip of the Q.S.T.S. changes the angle of the jet (out- put) nozzle at the rear of the craft. The nozzle angle changes the trim angle of the vehicle to one of five positions : two posi- tions A and B for bow down, neutral “N”, and two positions C and D for bow up.1 Trim shifting grip2 Shift lock release leverTo change the trim angle of the vehicle1) Set the throttle lever to half open (3000 r/min) or less.2) Squeeze and hold the shift lock release lever. Then turn the trim shift- ing grip to the desired position.8 Turning the gripto A or B from “N”:Bow will go down while the vehicle is on plane.8 Turning the grip to C or D from “N”:Bow will go up while the vehicle ison plane.3) Release the shift lock release lever tolock the position.cCDo not turn the grip while operating the vehicle at full throttle, otherwise damage could occur to the Q.S.T.S.The Neutral (“N”) shift position will pro- vide good performance for most condi- tions. To enhance particular types of per- formance, choose the one of the “Bow Down” or “Bow Up” positions.GP7-026A BC DDCB AD CNB AGP7-0272-10]]></page><page Index="35" isMAC="true"><![CDATA[EShifting to “Bow Down”“Bow Down” puts more of the bow in the water. This gives the water vehicle more “hook”, which enhances turning perfor- mance. This position will also help the water vehicle get up on plane more quick- ly. At higher speeds, however, the water vehicle will have greater tendency to “bow steer” and follow waves and wakes in the water. Fuel economy and maxi- mum speed are also reduced.Shifting to “Bow Up”“Bow Up” puts less of the bow in the water. There is less water resistance, so straight-ahead acceleration when on plane and top speed are enhanced. In some conditions, however, the vehicle may tend to “porpoise” (hop in the water). If the vehicle is porpoising, choose Neutral or Bow Down trim.EJU00366aOVERHEAT WARNING SYSTEMThe engine has an overheat warning device. If the engine starts to overheat, the overheat warning symbol/indicator begins to blink, the buzzer sounds, and the engine speed will be limited to about 3,000 r/min.If this happens, check for water discharge at the cooling water pilot outlet(s). If there is no discharge of water, beach the vehi- cle and check the jet intake grille and impeller for clogging.EJW79011WARNING67 584 31000 r/minA/SETBMODE2 1C0 mphGP7-028GU0-0232-11]]></page><page Index="36" isMAC="true"><![CDATA[EGP7-029wBefore attempting to remove weeds or debris from the jet intake or impeller areas, shut off the engine and remove the lock plate from the engine stop lanyard switch. Severe injury or death could result from coming in contact with the rotating parts of the jet pump.cCIf you cannot locate and correct the cause of the overheating, consult a Yamaha dealer. Continuing to operate at higher speeds could result in severe engine damage.NOTE:The buzzer will stop sounding if any but- ton on the multifunction meter is pressed.EJU00367HANDGRIPSHandgrips provide a handhold to use while boarding the vehicle.1 HandgripscCDo not use to tow objects, lift vehicle, orattach tie downs. Damage could occur.EJU00368BOW EYE, ROPE HOLES, AND CLEATThe bow eye, rope holes, and cleat are designed for mooring the vehicle and for securing it to the trailer.1 Bow eye2 Rope holes 3 CleatcCCleat is for mooring only. Do not usecleat to lift vehicle. Damage could occur.qGP7-030e wqGP7-0312-12]]></page><page Index="37" isMAC="true"><![CDATA[EWARNING67 584 31000 r/minA/SETBMODE2 1C0 mphGP7-032EJU00656aMULTIFUNCTION METERThis meter contains following functions for the help and convenience of opera- tion.1 “MODE” button2 “SET” button3 “CODE” setting buttons4 Tachometer5 Speedometer6 Fuel level meter7 Engine oil level meter8 Display for Clock, Hour meter, Trip meterand Trip timer9 Warning lamp (LED)0 Display for PADLOC and direction of warn-ing indicatorq Warning indicatorscC8 On land, do not attempt to run the engine at full throttle or for more than 15 seconds to check the operation of this meter. Otherwise the engine could overheat.8Use the specified resistor-type spark plug and cap, otherwise the meter may function erratically.NOTE:After starting the engine, the demonstra- tion mode display starts showing, then all displays light up and the buzzer sound twice. After few seconds, the meter will operate normally. After stopping the engine, in normal operation, current dis- plays will operate for another 30 seconds.WARNING5678 o 10004 3210qr/minrMODEmpht GP7-033WARNINGy !0 !1!1iA/SET w BeuCGP7-034WARNING67 584 31000 r/minA/SETBMODE2 1C0 mphGP7-0432-13]]></page><page Index="38" isMAC="true"><![CDATA[EJU00657aPADLOC (Programmable digital locking ignition)This feature is provided to deter unautho- rized use. The function allows you to chose either “START” or “LOCK” mode, as the situation requires, much as you would use a main switch key in a motor vehicle.If you have previously chosen “LOCK” mode, the engine will not start unless the right code is put in to select “START” mode.NOTE:If you do not use the PADLOC system, it is unnecessary to perform the initial setting of PADLOC. If so the “START” mode is automatically selected.8 Initial setting1) Disconnect the blue connector 1behind the front storage compart-ment.2) After the warning lamp (LED) lights,press the “MODE” button for at least 3 seconds until the display shows “COdE”. You are ready to set your code.3) Select your 4-letter code by pressing the “A/SET”, “B” or “C” buttons in a desired sequence.NOTE:If you do not press a button for more than 10 seconds, the display automatically turns off. This cancels the process of set- ting of a code.EqGP7-0355678WARNING4 32101000 r/minMODEmphGP7-036WARNINGA/SETBCGP7-0372-14]]></page><page Index="39" isMAC="true"><![CDATA[EWARNINGA/SETBCGP7-0384) After completing code setting, the buzzer will sound 3 times and the dis- play will show “SET”. Lastly, the dis- play turns off and the warning lamp (LED) turns on again. After the meter has displayed this sequence, recon- nect the blue connector.NOTE:8 Your own code is kept even if the bat- tery terminal is disconnected.8 If you forget your own code, or if you want to change the code, do this “Initial setting” procedure again from the beginning.8 Selecting “START” or “LOCK” mode Selecting the desired mode can only be done after the “Initial setting” has been done and while the display is not lighting.1) Press the “MODE” button until themeter displays the current mode,“START” or “LOCK”.2) With “START” or “LOCK” displayed,press the “MODE” button continu- ously for about 3 seconds until the display changes to “COdE”.3) Enter your 4-letter code by pressing the “A/SET”, “B” or “C” buttons in the right sequence.NOTE:If you do not press a button for more than 10 seconds, the display automatically turns off. This cancels the process of selecting the mode.WARNINGWARNINGMODEMODEGP7-041*WARNINGA/SETBCGP7-039*MODEWARNINGA/SETBCGP7-0402-15]]></page><page Index="40" isMAC="true"><![CDATA[EWARNINGWARNINGGP7-0414) If the code entered is correct, the mode will change from the previous mode to either “START” or “LOCK”. Then the mode display and buzzer will operate for 2 seconds.NOTE:8 Once you select a mode, the mode will not be changed unless you perform this mode selection again.8 If the wrong code has been put in, the mode display shows “ERROR” for 2 seconds and the buzzer will sound 5 times. Then the display turns back to “COdE”.EJU00383TachometerThe engine speed (r/min) is displayed by segments. Each segment indicates a 200 r/min increment.WARNINGA/SETBCGP7-042WARNING56784 32101000 r/minMODEmphGP7-0442-16]]></page><page Index="41" isMAC="true"><![CDATA[F4 F3 F2 F1F3 F2 F1F2 F1F1F1 EmptyONONF4 F3 F2 F1MODE4 32101000 r/minmphEmptyDisplayCapacity:L(US gal, Imp gal)more than 32 (8.5,7.0)26~32 (6.9,5.7)~(8.5,7.0)17~26 (4.5,3.7)~(6.9,5.7)12~17 (3.2,2.6)~(4.5,3.7)0~12 (3.2,2.6)5678WARNINGGP7-045A/SETBCONONBlinkingWARNINGEJU00384SpeedometerThe meter shows the vehicle speed in miles per hour (mph).EJU00386aFuel level meterThe fuel level meter is provided for con- venient fuel level checking while riding. The fuel level meter has four segments which show the amount of fuel remaining in the fuel tank.NOTE:The indication of the segments differs on your operating condition. Use the meter as a reference.GP7-0462-17E]]></page><page Index="42" isMAC="true"><![CDATA[F2 F1F1EmptyWARNINGEJU00387aEngine oil level meterThe engine oil level meter is provided for convenient oil level checking while riding. The engine oil level meter has three seg- ments which show the amount of oil remaining in the oil tank.MODEDisplayCapacity:L(US gal, Imp gal)more than 2.7 (0.71,0.59)1.2~2.7 (0.31,0.26)~(0.71,0.59)0~1.2 (0.31,0.26)A/SETBCThe indication of the segments differs on your operating condition. Use the meter as a reference.WARNINGEJU00388aClockA 12-hour clock is provided in this meter. To show the clock, press the “MODE” button until the display shows “CLOCK”.8 Setting the time1) When the display shows “CLOCK”,press the mode button for at least 3seconds.2) The buzzer will sound once. The dis-play of hour unit and “SET” start blinking. Then press the “A/SET” but- ton until desired hour is displayed.3) Press “MODE” button again.4) The buzzer will sound once. The dis- play of minute unit and “SET” start blinking. Then press the “A/SET” but-ton until desired minute is displayed.5) Press “MODE” button again.WARNINGA/SETBCONONONF2F1 EmptyA/SETBCGP7-047 NOTE:GP7-048GP7-0492-18E]]></page><page Index="43" isMAC="true"><![CDATA[6) The buzzer will sound twice. The warning indicator lamp and “SET” blinks for 2 seconds. Then the display turns to “CLOCK” and shows the time.NOTE:After the battery terminal is disconnected, the clock will be reset.EJU00390Hour meterThe hour meter is provided to make it easy to follow the maintenance schedule. The meter shows the hours of engine operation that have elapsed since the vehicle was new. To show the hour meter, press the “MODE” button until the display shows “HOUR.M”.EJU00659Trip timerThe trip timer mode is provided for count- ing the time. To show the trip timer, press the “MODE” button until the display shows “TRIP.T”.1 Minute unit 2 Second unit8 Operation1) When the display shows “TRIP.T”,press the “A/SET” button to startcounting. The buzzer will sound once.2) Press the “A/SET” button again to stop counting. The buzzer will soundonce.3) Press “MODE” button for at least 2seconds to reset the counted time. The buzzer will sound twice. The dis- play of time and “TRIP.T” blinks for 2 seconds. Now it is ready to start counting.2-19EWARNINGA/SETBCGP7-050WARNINGqwBCA/SETGP7-051*MODEWARNINGA/SETBCGP7-052*]]></page><page Index="44" isMAC="true"><![CDATA[EWARNINGA/SETBCGP7-053MODEEJU00660aTrip meterA trip meter is provided for measuring the approximate traveled distance in miles. To show the trip meter, press the “MODE” button until the display shows “TRIP”. After showing “TRIP”, the display turns to “MILE”.1) When the display shows “MILE”, press the “MODE” button for at least 2 seconds.2) The buzzer will sound twice. The warning lamp (LED) and “MILE” blinks for 2 seconds, and “000” is dis- played. Now the meter will start to measure the distance you will travel.3) When the trip meter begins measur- ing the traveled distance, the “.” to the left of “MILE” on the display will blink. When the watercraft is stopped, the “.” will no longer be dis- played.NOTE:Measured distance may vary depending on the water surface conditions, and wind direction. The measured distance should be used for a reference.EJU00664aWarning indicators8 Fuel levelIf the fuel remaining in the tank drops to about 12 L (3.2 US gal, 2.6 Imp gal), the fuel level segment, the fuel warning indi- cator, “FUEL” and the warning indicator lamp begin to blink. The buzzer also starts sounding.WARNINGA/SETBCGP7-054MODEWARNINGA/SETBCGP7-0552-20]]></page><page Index="45" isMAC="true"><![CDATA[EWARNINGA/SETBCGP7-0568 Oil levelIf the oil remaining in the tank drops to about 1.2 L (0.31 US gal, 0.26 Imp gal) or the oil filter is clogged, the oil level seg- ment, the oil warning indicator, “OIL” and the warning indicator lamp begin to blink. The buzzer also starts sounding.If the oil level warning indicator begins to blink, refill with engine oil as soon as pos- sible.NOTE:If the warning indicator blinks with ade- quate oil in the tank, check the oil filter for clogging.8 OverheatIf the engine starts to overheat, the over- heat warning indicator, “W.TEMP” and the warning lamp (LED) begin to blink. The buzzer also starts sounding. Refer to “Overheat warning system” on page 2-11.8 Low battery voltageIf the battery voltage becomes less than 11.5 volts, the low battery voltage indica- tor, “VOLT” and the warning lamp (LED) begin to blink. The buzzer also starts sounding. If this happens during opera- tion, beach the vehicle. Then recharge the battery and have the charging system inspected by a Yamaha water vehicle dealer.NOTE:8 In warning indicators operation, the warning indicators will operate for 30 seconds after stopping the engine.8 The buzzer will stop sounding if any button is pressed.WARNINGA/SETBCGP7-057WARNINGA/SETBCGP7-0582-21]]></page><page Index="46" isMAC="true"><![CDATA[EqEJU00909STORAGE COMPARTMENTSThe storage compartment(s) is provided to store the manuals, tools, and other equipment for cruising.Make sure all storage compartments are firmly secured before riding.NOTE:The storage compartment(s) is not designed to be waterproof. If you put the manuals in the compartment(s), store them in a waterproof bag to protect them from water damage.If your owner’s manual becomes dam- aged, order a replacement from a Yamaha water vehicle dealer.Front storage compartmentA front storage compartment is provided under the front hood.8 OpeningPull up the latch lever to open the front hood.NOTE:The front storage compartment can be removed to access the engine room.1 Latch lever2 Front storage compartmentCapacity: 16.5 L (4.4 US gal, 3.6 Imp gal) Load limit: 5 kg (11.0 lb)8 ClosingBe sure the storage compartment is in place, then close the front hood and push down on the top of the hood until it locks securely.GP7-059wGP7-060GP7-0612-22]]></page><page Index="47" isMAC="true"><![CDATA[EerGP7-062Grove compartmentA grove compartment is provided below the handlebars. Push the latch button to open the lid. To close the lid, push the lid down to lock it securely.3 Latch button4 Storage compartment:Capacity: 1 L (0.26 US gal, 0.22 Imp gal) Load limit: 1 kg (2.2 lb)Seat storage compartmentA seat storage compartment is provided under the rear seat.Refer to “REAR SEAT” for removal and installation.5 Seat storage compartmentCapacity: 21.2 L (5.6 US gal, 4.7 Imp gal) Load limit: 9 kg (19.8 lb)GP7-063tGP7-0642-23]]></page><page Index="48" isMAC="true"><![CDATA[E1A BGP7-065EJU00409YAMAHA ADJUSTABLE SPONSON (Y.A.S.)The sponsons have adjustable positioning to allow the operator to enhance either straight-line performance or turning per- formance according to the preference and operating conditions.1 SponsonAdjusting to upward AThere will be less water resistance in this position, so straight-ahead acceleration when on plane and top speed will be enhanced.Adjusting to downward BThis position will give the water vehicle more “hook” which will enhance turning performance.2-24]]></page><page Index="49" isMAC="true"><![CDATA[E– MEMO –]]></page><page Index="50" isMAC="true"><![CDATA[EJU00410Chapter 3 1 OPERATION ANDRIDING1GASOLINE (PETROL) AND ENGINEOIL FILLING...............................................3-1 2Filling the Gasoline (petrol) tank ......3-1 Filling the oil tank...............................3-2PRE-OPERATION CHECKS......................3-3 Check list .............................................3-3 Checkpoint.........................................3-4 3OPERATION ..............................................3-9 Break-in (Running-in) procedure......3-9 Starting the engine ..........................3-11 Stopping the engine ........................3-14RIDING YOUR WATER VEHICLE ..........3-15 4 Getting to know your watervehicle ...............................................3-15 Learning to ride your watervehicle ...............................................3-15 Riding with a passenger..................3-16 Starting..............................................3-17 Boarding and starting 5 in deep water....................................3-18 Load limit ..........................................3-20 Capsized water vehicle....................3-21 Turning..............................................3-22 Stopping ...........................................3-23 Beaching...........................................3-23 6 Docking .............................................3-24 Rough water operation ...................3-24POST-OPERATION CHECKS .................3-25 TRANSPORTATION ...............................3-27E11111]]></page><page Index="51" isMAC="true"><![CDATA[EJU00411GASOLINE (PETROL) AND ENGINE OIL FILLINGThis engine uses Yamaha’s oil injection system, which provides superior lubrica- tion by ensuring the proper oil ratio for all operating conditions. No fuel premixing is necessary (except during break-in / run- ning-in). Simply pour gasoline (petrol) into the fuel tank and oil into the oil tank.EJU00414FILLING THE GASOLINE (PETROL) TANK1) Remove the rear and front seats, soyou can watch the fuel level.2) Open the fuel tank filler cap, and slowly add fuel to the fuel tank. Be careful not to spill fuel or overfill thetank.3) Stop filling when the fuel just reachesthe bottom of the filler tube on the top of the fuel tank. Do not fill into the filler tube, because gasoline (petrol) could spill out.cCBe careful when refueling. Avoid getting water or other contaminants in the fuel tank. Contaminated fuel can cause poor running or engine damage.EGP7-0663-1Fuel tank capacity:50 litres (13.2 US gal, 11 Imp gal)]]></page><page Index="52" isMAC="true"><![CDATA[EEJU00419FILLING THE OIL TANK1) Remove the rear and front seats, so you can watch the oil level.2) Open the oil tank filler cap, and very slowly add engine oil to the oil tank.3) Stop pouring when the oil just reach- es the bottom of the filler tube.cCDo not allow the oil tank to empty com- pletely. The oil injection pump must be bled to ensure proper oil flow after the tank empties. Otherwise, engine damage may occur. If bleeding of the oil pump is necessary, take the water vehicle to your nearest Yamaha dealer.wOil in the bilge is a serious fire hazard. Wipe up any spilled oil immediately.GP7-0673-2Oil tank capacity:4.0 litres (1.06 US gal, 0.88 Imp gal)]]></page><page Index="53" isMAC="true"><![CDATA[EEJU00422CHECK LISTPRE-OPERATION CHECKSBefore operating this water vehicle, perform the following checks:wIf any item in the Pre-Operation check is not working properly, have it inspected and repaired before operating the water vehicle. Otherwise an accident could occur.ITEMROUTINEPAGEENGINE COMPARTMENTRemove seats and front storage compartment, and ventilate the engine compartment.3-4BILGECheck, and remove all water and fuel residue before launching.3-5THROTTLECheck for proper throttle operation.3-7STEERINGCheck for proper steering operation.3-7FUEL AND OILCheck fuel and oil level; add as necessary. Check for leaks.3-4WATER SEPARATORCheck retaining water, drain it if retaining.3-5BATTERYCheck fluid level and charge condition. Check the terminal securely.3-6FRONT HOODCheck the front food securely.—SEATCheck that the seats are securely fastened to the deck.—HULL / DECKCheck the hull and deck for damage or cracks.—JET (WATER) INTAKECheck that no debris is in the intake.3-8FIRE EXTINGUISHERCheck readiness of the extinguisher.3-6SWITCHES AND LANYARDCheck operation of the starter, stop switch and engine stop switch lanyard when the vehicle is in the water.3-8COOLING WATER PILOT OUTLETCheck that water comes out while the engine is running.3-9MULTIFUNCTION METERCheck the meter for proper operation. Check there are no warning indications.3-9NOTE:Pre-operation checks should be made each time the vehicle is used. This procedure can be accomplished thoroughly in a short time. The added safety and reliability the checks assure is worth the time involved.3-3]]></page><page Index="54" isMAC="true"><![CDATA[EGP7-068EJU00425aCHECK POINTEngine compartmentOpen the front hood and remove the stor- age compartment, and also remove the front seat for a few minutes to allow any fuel vapors to escape.wFailure to ventilate the engine compart- ment to release fuel vapors could result in fire or explosion. Do not start the engine if you can smell fuel vapors in the engine compartment.EJU00427Fuel systemRefer to page 4-10 “FUEL SYSTEM INSPECTION” for correct procedure.EJU00430aFuel and engine oil1) Remove the fuel tank filler cap to release any pressure which might have built up in the tank because of fuel expansion.2) Remove the rear and front seats.3) Check the fuel and oil level (oil injec- tion model) in the tank and add as necessary. (Refer to page 3-1 “GASO- LINE (PETROL) AND ENGINE OILFILLING”)4) Turn the fuel cock to the “ON” posi-tion.GP7-0153-4]]></page><page Index="55" isMAC="true"><![CDATA[EwqGU0-069EJU00432aWater separator1) Check the water separator to see if there is any water in this separator. This water separator retains any water entering through the fuel tank breather pipe if the Vehicle is cap- sized.Normally this water separator isempty. (No water)2) If water remains in this water separa-tor, drain it by removing the drain screw.Do not forget to reinstall the drain screw securely.1 Water separator 2 Drain screwEJU00433aBilgeExcessive water in the engine compart- ment bilge can splash into the carburetor and engine. This could cause engine dam- age. If there is any moisture in the bilge, raise the bow about 30 cm (12 in.) and remove the hull drain plugs. After the water has drained, wipe the bilge with dry rags. Reinstall the drain plugs.cCTighten two hull drain plugs securely before launching the Water Vehicle. Clean any foreign material, such as dirt or sand, from the threads before installing the drain plugs.wAlways properly dispose of gasoline (petrol) soaked rags. They can sponta- neously ignite.GP7-0703-5]]></page><page Index="56" isMAC="true"><![CDATA[EEJU00435aBatteryCheck the battery condition and the bat- tery electrolyte level.Check that the battery terminals are tight- ened securely and that there is no ero- sion.wThe battery must always be fully charged and in good condition. Loss of battery power may leave you stranded. Never operate the water vehicle if the battery does not have sufficient power to start the engine or if it shows any other signs of decreased power.EJU00728Fire extinguisherMake sure the fire extinguisher is aboard and full. See the instructions supplied by the fire extinguisher manufacturer to determine proper indication of condition. Always keep the extinguisher in the fire extinguisher compartment.Always carry a fire extinguisher on board. The fire extinguisher compartment 1 is in the front storage compartment. Open the front hood and turn the fire extinguisher compartment cap 2 counterclockwise to open it.Reinstall the cap and tighten it securely after inserting the fire extinguisher into the compartment.NOTE:A fire extinguisher is not standard equip- ment with this vehicle. If you do not have one, contact your local Yamaha Water Vehicle dealer or a fire extinguisher dealer to obtain one meeting the proper specifi- cations.KA003wqGP7-0713-6]]></page><page Index="57" isMAC="true"><![CDATA[EGP7-072EJU00447ThrottleOperate the throttle lever several times to make sure there is no hesitation in its travel. It should be smooth over the com- plete range, and spring back to the idle position on its own when released.EJU00448SteeringMake sure the handlebars are not loose. Turn them full-right and full-left to make sure operation is smooth and unrestricted throughout the whole range. Make sure the jet nozzle also changes directions as the handlebars are turned, and that there is no free play between the handlebars and the jet nozzle.EJU00451aJet intakeCarefully check the jet intake for weeds, debris, or anything else that might restrict the intake of water. If the intake is clogged, cavitation could occur, reducing jet thrust, and possibly damaging jet pump parts. In some cases, the engine may overheat because of lack of cooling water, and damage could result. Engine cooling water is fed to the engine by the jet pump (see pages 5-3).wBefore attempting to remove weeds or debris from the jet intake or impeller areas, shut off the engine and remove the lock plate from the engine stop lanyard switch. Severe injury or death could result from coming in contact with the rotating parts of the jet pump.GU0-073GP7-0293-7]]></page><page Index="58" isMAC="true"><![CDATA[EewqGP7-074EJU00915aSwitchesFirst, place the vehicle in the water to pro- vide adequate engine cooling. Push the starter switch 1 and start the engine, then push the engine stop switch 2. Restart the engine and pull the engine stop switch lanyard on your left wrist to remove the lock plate 3 from the engine stop lanyard switch. Verify that the engine stops immediately, when the engine stop switch pushed or the lock plate remove from the engine stop lanyard switch. Be sure the lanyard is in good condition with no frayed or broken parts. A damaged lanyard must be replaced; it should never be repaired or tied together.EJU00453aCooling water pilot outletCheck that water comes out from the out- let(s) while engine is running in the water. Refer to page 2-9 for correct operation of the device.EJU00454Multifunction meterCheck the operation of multifunction meter. Refer to page 2-13 “MULTIFUNC- TION METER” for correct meter opera- tion.GU0-023WARNING67 584 31000 r/minA/SETBMODE2 1C0 mphGP7-0753-8]]></page><page Index="59" isMAC="true"><![CDATA[EEJU00455OPERATIONwBefore operating your water vehicle, become familiar with all controls. Consult your Yamaha dealer about any control or function you do not fully understand. Failure to understand how controls work could cause an accident or prevent you from avoiding an accident.cCThere are two hull drain plugs near the jet unit on the stern side. Be sure they are securely tightened before launching the Water Vehicle.EJU00459BREAK-IN (RUNNING-IN) PROCEDUREThe engine and other components require a break-in (running-in) period to allow surfaces of moving parts to wear in even- ly. This ensures proper performance and promotes longer component life.cC8 During first tankful of operation, use 50 : 1 premix fuel (in addition to oil in oil tank).8 After above period, use straight gaso- line (petrol) for normal operation.GP7-0763-9]]></page><page Index="60" isMAC="true"><![CDATA[E1) Launch the vehicle and start the engine.wNever ride in water that is less than 60 cm (2 feet) deep. You increase your chance of hitting an underwater obstacle. You could be injured. Operate at higher speeds only in deep water free of under water obstacles.2) Run the engine at the lowest possible speed for the first five minutes.3) Gradually open the throttle to 3/4 or less.4) Continue operation at 3/4 - throttle or less until the first tankful of fuel has been used up.5) Fill the tank with a straight gasoline, and proceed with normal operation.cCFailure to follow the break-in (running-in) procedure properly can result in severe damage to the engine.3-10]]></page><page Index="61" isMAC="true"><![CDATA[EEJU00461aSTARTING THE ENGINEwThis product emits exhaust gases which contain carbon monoxide, a colorless, odorless gas which may cause brain dam- age or death when inhaled. Symptoms include nausea, dizziness, and drowsi- ness. Operate the vehicle in a open area.1) Always make sure the vehicle is launched and used in waters that are free from weeds and debris, and in depths of at least 60 cm (2 feet).wNever ride in water that is less than 60 cm (2 feet) deep. You increase your chance of hitting an underwater obstacle. You could be injured. Operate at higher speeds only in deep water free of under water obstacles.cCNever ride in water that is less than 60cm (2 feet) deep. Pebbles or sand could be sucked into the jet intake, causing impeller damage or engine overheating.2) Turn the fuel cock to the “ON” posi- tion.NOTE:Before the first start-up, remove the fuel tank filler cap to release any built-up pres- sure in the tank because of fuel expan- sion.60 cm (2 ft)GP7-077GP7-015GP7-0783-11]]></page><page Index="62" isMAC="true"><![CDATA[EeqwGP7-0793) Attach the lock plate to the engine stop lanyard switch. Also, attach the lanyard to your left wrist.1 Engine stop lanyard switch 2 Lanyard3 Lock platewCheck that the lanyard is not frayed or broken, wrapped around the handlebars, or tangled in controls. If the operator falls off, the vehicle could continue to run and cause an accident.The operator would also be unable to rebound the vehicle, which increases the chance of being hit by another boat and the risk of exposure.NOTE:It is not possible to start the engine with the lock plate removed from the engine stop lanyard switch.4) Pull the choke knob all the way out to start a cold engine.NOTE:The choke should not be used when the engine is warm.5) If the “LOCK” mode was chosen pre- viously, chose the “START” mode before starting the engine. To set the mode, refer to “PADLOC” in “MULTI- FUNCTION METER”.GP7-080GP7-0813-12]]></page><page Index="63" isMAC="true"><![CDATA[ENOTE:8 If initial setting of the PADLOC has not been done, the “START” mode is auto- matically selected.8 If you have previously chosen “LOCK” mode, the engine will not start unless the right code is put in to select “START” mode.6) While lightly squeezing the throttle lever, push the starter switch (green button).wOn this vehicle, the engine is connected directly to the drive unit. Starting the engine immediately generates some thrust. Only enough throttle should be applied to keep the engine at a fast enough idle to stay running.7) As soon as the engine starts to run, release the starter button at once. The starter button returns to its home position automatically.cC8 Never push the starter switch while the engine is running.8 Do not keep the starter motor running for more than five seconds. The battery will be quickly discharged, and it will be impossible to start the engine. The starter motor may also be damaged. If the engine does not start after five sec- onds of cranking, release the starter button. Wait at least 15 seconds before trying to start the engine again.3-13]]></page><page Index="64" isMAC="true"><![CDATA[E8) After the engine is warm, push the choke knob in fully, to its original position.NOTE:If the choke knob is left pulled out, the engine will stall.EJU00666aSTOPPING THE ENGINETo stop the engine, release the throttle lever, then push and hold the engine stop switch (red button) with your left hand. When the red button is pushed the igni- tion stops, which stops the engine.NOTE:If leaving the water vehicle, choose the “LOCK” mode on multifunction meter by setting PADLOC, and remove the engine stop switch lanyard to deter unauthorized use. To set the mode, refer to “PADLOC” of “MULTIFUNCTION METER”.GP7-0823-14]]></page><page Index="65" isMAC="true"><![CDATA[EEJU00466RIDING YOUR WATER VEHICLEGETTING TO KNOW YOUR WATER VEHICLERiding your water vehicle requires skills acquired through practice over a period of time. Take the time to learn the basic techniques well before attempting more difficult maneuvers.Riding your new water vehicle can be a very enjoyable activity, providing you with hours of pleasure. But it is essential to familiarize yourself with the operation of the water vehicle to achieve the skill necessary to enjoy riding safely. Before you begin to ride be sure you have read this Owner’s Manual completely and understand the operation of the controls. Pay particular attention to the safety infor- mation on pages 1-7 to 1-12. Read all cau- tion and warning labels on your water vehicle.Also read the Riding Practice Tips booklet supplied with your vehicle.Remember: Your water vehicle is designed for one operator and one pas- senger only. Never have more than two people on the vehicle at any time.EJU00472LEARNING TO RIDE YOUR WATER VEHICLEBefore riding, always perform the Pre- Operation Checks listed on page 3-3. The short time spent checking the machines condition will reward you with added safety and a more reliable water vehicle. Check state and local laws before operat- ing your water vehicle. Read the Boat Handling Instructions issued by the U.S. Coast Guard for basic safe boating infor- mation.Select a wide area to learn in, where visi- bility is good and other boat traffic is light. Have someone in a boat accompany you if operating far from shore. Keep the proper distance from other boats and vehicles. Do not ride where people are swimming.Always attach the engine stop switch lan- yard to your left wrist before operating. You must always wear a U.S. Coast Guard approved personal flotation device. Strong streams of water from the jet noz- zle, or impact with the water surface can be dangerous. You must wear a wetsuit. Normal swimming attire may not ade- quately protect you. A wetsuit will help protect against internal injuries to orifices (rectum and vagina) from strong jet streams, and from impact with the water surface. Wetsuits also help protect against hypothermia (low body tempera- ture) and abrasions.You should wear water shoes to help pro- tect feet from objects hidden under water. Wearing gloves can also help protect hands from abrasions.3-15]]></page><page Index="66" isMAC="true"><![CDATA[EWind, water, and glare from the sun may get in your eyes while you operate your water vehicle, reducing your ability to see. You may want to consider wearing eye protection such as sunglasses or goggles while riding. Some may find, however, that eye protection obstructs or distorts their vision, and distracts from operation. Only you know the circumstances in which you operate your water vehicle, so only you can decide if the benefits of eye protection outweigh the potential haz- ards.You should grip the handlebars firmly and keep both feet on the footrest floor. Do not attempt to ride with a passenger until your riding skills are fully developed.EJU00476RIDING WITH A PASSENGERWhen two persons (including the opera- tor) are on board, the vehicle handles dif- ferently, and is not as easy to maneuver, so operating it requires a higher degree of skill. Before attempting to operate the water vehicle with a passenger aboard, the operator must practice enough riding alone to be able to acquire the necessary skills.The passenger must always wear U.S. Coast Guard approved personal flotation devices.Strong streams of water from the jet noz- zle, or impact with the water surface can be dangerous. Both operator and a pas- senger must wear wetsuits. Normal swimming attire may not adequately pro- tect you. A wetsuit will help protect against internal injuries to orifices (rectumand vagina) from strong jet streams, and from impact with the water surface. Wet- suits also help protect against hypother- mia (low body temperature) and abra- sions.Both operator and a passenger should wear water shoes to help protect feet from objects hidden under water. Wear- ing gloves can also help protect hands from abrasions.Wind, water, and glare from the sun may get in your eyes while you operate your water vehicle, reducing your ability to see. You may want to consider wearing eye protection such as sunglasses or goggles while riding. Some may find, however, that eye protection obstructs or distorts their vision, and distracts from operation. Only you know the circumstances in which you operate your water vehicle, so only you can decide if the benefits of eye protection outweigh the potential haz- ards.This water vehicle is designed to carry one operator and one passenger, as long as the total weight does not exceed 160 kg (353 lb).The operator should grip the handlebars firmly and keep both feet on the footrest floor. Do not give a ride to a child whose feet cannot reach the footrest floor. The passenger(s) should hold on firmly to the person in front of them and keep both feet on the footrest floor.wWhen a passenger is on board, make sure he or she is holding on firmly before you start to accelerate.3-16]]></page><page Index="67" isMAC="true"><![CDATA[EEJU00484STARTINGw8 There may be other water craft, obstructions, or swimmers around you. Check carefully before starting off to avoid an accident.8 Practice getting on board in shallow water before riding in deep water.EJU00486aStarting in shallow water1) Do not start your water vehicle in less than 60 cm (2 feet) of water. Put it in an area that is deep enough, then board the vehicle from the side or the rear.2) Attach the lanyard to your left wrist, then install the lock plate to the engine stop lanyard switch.3) Grip the handlebars with both hands, place both feet on the footrest floor, start the engine, and start off.Starting from a landing jetty1) Board the vehicle from the side.2) Attach the lanyard to your left wrist, then install the lock plate to the60cm(2 ft)KA021KA022 3)engine stop lanyard switch.Push the vehicle away from the jetty, grip the handlebars with both hands, place both feet on the footrest floor, start the engine, and start off.3-17]]></page><page Index="68" isMAC="true"><![CDATA[EEJU00490aBOARDING AND STARTING IN DEEP WATERw8 Operator and passenger should prac- tice getting on board in shallow water before riding in deep water. Reboarding in deep water requires more skill.8 The fatigue and exposure that could result after unsuccessful attempts to get back on the vehicle may increase the risk of injuries and drowning.Solo1) Swim to the rear of the vehicle and place both hands on the footrest floor. Pull yourself up on the floor and kneel down.2) Move to the seat and sit astride.K1041K1042K10433) Attach the lanyard to your left wrist, then install the lock plate to the engine stop lanyard switch.4) Grip the handlebars firmly with both hands, place both feet on the footrest floor, start the engine, and start off.3-18]]></page><page Index="69" isMAC="true"><![CDATA[EK2011EJU00492aWith a passengerwStrong streams of water from the jet noz- zle can be dangerous, and can result in injury when directed at body orifices (rec- tum and vagina). Do not open the throttle until each passenger is seated with feet on the floor and is holding on to the per- son in front of him or her.1) Climb up on board as noted earlier, and sit astride the seat. Attach the lanyard to your left wrist, then install the lock plate to the engine stop lan- yard switch.2) The passenger should move to the rear of the vehicle.3) Next, let the passenger get on board and sit on the rear portion of the seat.NOTE:When letting the passenger get on board, both he and operator should try to bal- ance the vehicle.4) The operator should check to see that the passenger has his feet on the footrest floor and is holding the oper- ator tightly, then start the engine, and accelerate to planing speed.wBefore starting off, make sure there are no boats, obstructions, or swimmers around you.K2012K2013K20143-19]]></page><page Index="70" isMAC="true"><![CDATA[EK2021EJU00494aLOAD LIMITThe heavier the total weight of the opera- tor and passenger, the more difficult it will be to balance the water vehicle. It is not advisable to ride the vehicle when the total weight exceeds 160 kg (353 lb) including any cargo.If it is difficult to balance the vehicle at a standstill, proceed as follows:1) The passenger must steady the water vehicle while the operator is board- ing. The operator pulls himself up onto the footrest floor into a seating position, then balances the vehicle.2) Attach the lanyard to your left wrist, then install the lock plate to the engine stop lanyard switch. Start the engine and keep it at idle.3) The passenger pulls himself up on the floor kneels down, then crawls onto the seat as the vehicle acceler- ates.wStrong streams of water from the jet noz- zle can be dangerous, and can result in injury when directed at body orifices (rec- tum and vagina). Do not open the throttle until each passenger is seated with feet on the floor and is holding on to the per- son in front of him or her.4) The water vehicle can now be acceler- ated to planing speed, then the opera- tor can reduce the throttle to the desired running speed.K2022K20233-20]]></page><page Index="71" isMAC="true"><![CDATA[EKA013EJU00497aCAPSIZED WATER VEHICLE1) Turn off the engine by removing the lock plate from the engine stop lan- yard switch. The engine will overheat when capsized because it has no water to pump as coolant.2) Swim to the rear side of the vehicle. Pull the vehicle over clockwise with the left hand on the ride plate while pushing down on the gunwale with your right hand/foot.Do not turn the vehicle counterclock- wise, or water may leak into the car- buretor and engine.NOTE:If the right side of the capsized vehicle (view from rear of the vehicle) tilts upward, first tilt the vehicle so the right side is down by pressing down on the gunwale with your weight. Then turn the vehicle over as described.3) Start the engine using normal proce- dure, then head for shore to inspect engine for water damage.wIMPROPER UPRIGHTING CAN CAUSE INJURY:8 Shut off engine.8 Do not put hand in intake grille.8 Watch so you are not hit by vehicle as it comes over.TO TURN OVER:8 Pull vehicle over with left hand on rideplate while pushing down on gunwale with right hand/foot.KA0143-21]]></page><page Index="72" isMAC="true"><![CDATA[EcCIf the vehicle has been capsized for 5 min- utes or more, air may have entered the oil injection system. Leave the engine off, or operate only at trolling speeds, for 10 minutes after the vehicle has been put right-side up. This will allow any air to bleed off.EJU00499TURNINGThrottle produces thrust from the jet pump. Directional control is provided by opening the throttle and turning the han- dlebars.To make a turn at higher than trolling speed: Reduce your speed, then turn the handlebars and shift your weight in the desired direction, and apply enough throt- tle to make your turn. High thrust turns the vehicle sharply; low thrust turns less sharply. Releasing the throttle completely causes the vehicle to go straight. TURNS CANNOT BE MADE WITHOUT APPLYING THROTTLE!w8 You need engine power to turn. Do not release the throttle completely. Releas- ing the throttle lever can cause you to hit an obstacle you are attempting to avoid. A collision could result in severe injury or death.8 Make gradual turns at higher speeds or slow down before turning. Sharp turns at higher speeds may cause the vehicle to slide sideways or spin. The passen- ger(s) and operator could be thrown off suddenly and be injured.GU0-083GU0-0843-22]]></page><page Index="73" isMAC="true"><![CDATA[E115m (380 ft)GU0-085EJU00634STOPPINGThe water vehicle is not equipped with a separate braking system. It is stopped by water resistance when the throttle lever is released. From full speed, the water vehi- cle stops in approximately 115 m (380 feet) after the throttle is released and the engine stopped. The stopping distance varies depending on gross weight, water surface conditions, and wind direction. The stated stopping distance should be used for a reference. The watercraft slows down as soon as the throttle lever is released, but will coast for a distance before fully stopping. If you are not sure you can stop in time before hitting an obstacle, apply throttle and turn in anoth- er direction.wAllow adequate stopping distance. Fail- ure to begin slowing soon enough could cause you to hit an obstacle you are approaching. Do not shut off the engine when slowing down in case you need engine power to steer away from a boat or other obstacle that comes into your path.EJU00503BEACHING1) Make sure no obstructions, boats or swimmers are near the beach. Release the throttle lever about 115 m (380 ft) before the intended landing area.2) Approach the beach slowly and stop the engine before reaching landing point. Remember: turning is impossi- ble with the engine stopped.3-23]]></page><page Index="74" isMAC="true"><![CDATA[E3) Get off the vehicle and pull it up on the beach.cCSmall pebbles, sand, seaweed, and other debris can be ingested into the jet intake and impair or damage the impeller. Always stop the engine and get off before beaching the vehicle.EJU00505DOCKING1) Make sure no obstructions, boats or swimmers are close to the water vehi- cle. Reduce speed about 115 m (380 ft) away from the dock.2) Slowly approach the dock and stop the engine just before coming along- side it.EJU00507ROUGH WATER OPERATIONOperating in rough water or jumping waves can crack the vehicle body or dam- age internal parts. The force of landing after jumping can cause a strong impact on both the water vehicle and the opera- tor. It is possible for the operator to hit his chest or jaw on the vehicle body or han- dlebars and be injured. Do not ride with your chin right above the handlebars or with your feet outside the vehicle. Avoid riding in rough water or bad weather con- ditions.wOperating in rough water or jumping waters can lead to injury. It may also damage the vehicle.K20013-24]]></page><page Index="75" isMAC="true"><![CDATA[E POST-OPERATION CHECKS1) After removing the vehicle from the water, put the vehicle in the horizon- tal position.2) Flush cooling system to prevent the cooling system from clogging up with salt, sand, or dirt. “Refer to pages 4-1 for the cooling system flushing proce- dure”.3) Lubricate the internal components by performing “LUBRICATION” at page 4-3, if storing the water vehicle for more than a week.4) Drain residual water from the exhaust system by alternately pulling and releasing the throttle lever for a peri- od of 10 to 15 seconds while the engine is running.cCDo not attempt to run the engine at full throttle or for more than 15 seconds while the vehicle is out of the water. The engine may overheat and/or seize.5) After operating the vehicle from the water, wash down the hull, handle- bars and drive unit with fresh water.EJU00508aGP7-0703-25]]></page><page Index="76" isMAC="true"><![CDATA[E6) Raise the bow about 30 cm (12 in.) and remove two hull drain plugs. Allow any water in the bilge to drain out.Rinse the engine compartment with a small amount of fresh water. Be care- ful not to get water on the carburetor or electrical components. After the water has drained, wipe the bilge with dry rags.Reinstall two drain plugs.NOTE:This vehicle is equipped with an automat- ic bilge-draining device that removes water from the engine compartment while you are underway.However, some residual water remains that must be drained by removing two drain plugs.wAlways properly dispose of gasoline (petrol) soaked rags. They can sponta- neously ignite.7) Spray a rust inhibitor, such as Yamaha Silicone Protectant and Lubricant, on metallic parts to mini- mize corrosion.3-26]]></page><page Index="77" isMAC="true"><![CDATA[GP7-086EJU00513E TRANSPORTATIONwAlways place the fuel cock in the “OFF” position when transporting the water vehicle. Otherwise, fuel could leak out into the engine or engine compartment, which would create a fire hazard.When transporting the water vehicle on a trailer, lock the bow with a pin to the trail- er and secure the stern with ropes or tie downs through the rope hole(s) on the rear footrest floor.cCDo not route ropes or tie downs over the seat, as they may leave permanent marks on the seats surface. Also wrap the ropes or tie downs with towels or rags where they touch the body of the water vehicle to avoid scratching or damage.GU0-0873-27]]></page><page Index="78" isMAC="true"><![CDATA[EJU00515EChapter 4 1 MAINTENANCEAND CARE1STORAGE..................................................4-1 Cooling system flushing ...................4-1 2 Lubrication ..........................................4-3Fuel system.........................................4-5 Battery .................................................4-5 Cleaning ..............................................4-6ADJUSTMENT AND MAINTENANCE....4-7 3 Owner‘s manual and tool kit.............4-8 Periodic inspection chart...................4-9Fuel system inspection....................4-10Fuel filter ...........................................4-11Fuel tank............................................4-11Oil injection system inspection ......4-12 Steering cable inspection................4-13 4 Throttle cable inspection andadjustment ........................................4-13 Quick shift trim system mechanism inspection .........................................4-14 Spark-plug cleaning andadjustment ........................................4-15 Greasing points................................4-16 5 Choke cable adjustment..................4-19 Battery ...............................................4-19 Carburetor adjustment ....................4-22Fuse replacement.............................4-23 Bleeding the oil injection pump .....4-23 YAMAHA adjustable sponson (Y.A.S.) 5 adjustment ........................................4-24SPECIFICATIONS ...................................4-256151111]]></page><page Index="79" isMAC="true"><![CDATA[wAlways place the fuel cock in the “OFF” position when storing the water vehicle. Otherwise, fuel could leak out into the engine or engine compartment, which would create a fire hazard.Water vehicle storage for prolonged peri- ods of time, such as winter storage, requires preventative maintenance to ensure against deterioration. It is advis- able to have the water vehicle serviced by an authorized Yamaha Water Vehicle dealer prior to storage. However, the fol- lowing procedures can be performed by the owner with a minimum of tools.EJU00913COOLING SYSTEM FLUSHINGCooling system flushing is essential in order to prevent the cooling system from being clogged with salt, sand, or dirt.cC8 Do not supply the water into the cool- ing water passages when the engine is not running. The water could flow back through the muffler into the crankcase causing severe engine damage.8 Do not run the engine for more 15 sec- onds after the water supply has been turned off to avoid engine overheat.1) Put the vehicle without lowering the bow on land.2) Open the cap 1. Press the flush kit garden hose adapter 2 into the flush hose connector 3 and turn until they are securely connected.EGP7-086EJU00516EJW42110STORAGEqweGP7-0884-1]]></page><page Index="80" isMAC="true"><![CDATA[E3) Connect both the garden hose adapter and a water tap using a hose.4) Start the engine. Then, immediately turn on water supply until the water flows out continually from the cooling water pilot outlet.5) Run the engine at an idle speed for 10 to 15 minutes watching engine condi- tion.If the engine stopped while flushing, turn off water supply immediately. Repeat above steps.6) Turn off the water supply. Then, force the remaining water out from the cooling passages by quickly opening and closing the throttle several times within 10 to 15 seconds.7) Stop the engine.8) Remove the garden hose adapter andsecure the cap.4-2]]></page><page Index="81" isMAC="true"><![CDATA[EEJU00526aLUBRICATIONwTo reduce the risk of fire or explosion: Never pour or spray gasoline, or any other substance except engine fogging oil through the hole(s) in the carburetor silencer cover.cC8 Be sure to replace the cap(s) securely after fogging the engine. Otherwise water could enter the engine and cause damage.8 Do not attempt to run the engine at full throttle or for more than 15 seconds while the vehicle is out of the water. The engine may overheat and/or seize.1) Open the cap 1 on the carburetor silencer by turning counterclockwise.2) With the water vehicle in a well-venti- lated area, start the engine.3) With the engine running at a fast idle, quickly spray as much Yamaha Stor- Rite Fogging Oil or an equivalent, as possible into the carburetor through the hole(s) in the silencer cover. Keep spraying until the engine stalls (or a maximum of 15 seconds). Reinstall the cap(s) securely.qGU0-0894-3]]></page><page Index="82" isMAC="true"><![CDATA[E4) Remove the spark plugs and pour approximately one tablespoon of oil into each cylinder.5) Grease the spark plug threads and reinstall the spark plugs.6) Lubricate all cables such as the throt- tle, choke, and steering cables.NOTE:Use a Yamaha Power Cable Luber and Yamaha Lube-Zall to pressure lubricate the cables and purge out any moisture between the inner and outer cables.7) Grease the areas of the water vehicle specified in “Grease Points” in the ADJUSTMENT AND MAINTENANCE section.4-4]]></page><page Index="83" isMAC="true"><![CDATA[EJU00528aFUEL SYSTEMTop off the fuel tank with fresh fuel/oil mixture and add one ounce of Yamaha Fuel Stabilizer and Conditioner to each gallon of fuel.NOTE:Use of Yamaha Fuel Stabilizer and Condi- tioner eliminates the need to drain the fuel system. Consult your Yamaha dealer or other qualified mechanic if the fuel sys- tem is to be drained instead.EJU00530aBATTERY1) When the machine is not to be used for a month or more, remove the bat- tery and store it in a cool, dark place. Clean the battery’s casing and termi- nals using a mixture of baking soda and water (one tablespoon. of baking soda to one cup of water). Apply dielectric grease or petroleum jelly to the battery terminals and to all exposed connectors.2) If the battery is to be stored for a longer period, check the specific grav- ity of the fluid at least once a month and recharge the battery if it gets too low.E4-5Specific gravity: 1.28 at 20°C (68°F)]]></page><page Index="84" isMAC="true"><![CDATA[EEJU00531CLEANING1) Wash down the hull, handlebars, and drive unit with fresh water.2) Rinse the engine and bilge area with fresh water. Drain off all water and wipe up remaining moisture with clean, dry rags.3) Spray the engine’s exterior with Yamaha Silicone Protectant and Lubricant.4) Wax the hull with a non-abrasive wax such as Yamaha Silicone Wax.5) Wipe all vinyl and rubber compo- nents, such as the seat and engine compartment seals, with a vinyl pro- tectant such as Yamaha Protectant.4-6]]></page><page Index="85" isMAC="true"><![CDATA[EJU00910ADJUSTMENT AND MAINTENANCEPeriodic inspection, adjustment and lubri- cation will keep your water vehicle in the safest and most efficient condition possi- ble. Safety is an obligation of the vehicle owner. The most important points of vehicle inspection, adjustment and lubri- cation are explained on the following pages.See your Yamaha dealer for genuine Yamaha replacement parts and optional accessories designed for your watercraft. Remember that failures which are the result of the installation of parts or acces- sories which are not qualitatively equiva- lent to genuine Yamaha parts are not cov- ered by the limited warranty.w8 Be sure to turn off the engine when you perform maintenance unless otherwise specified. Otherwise, accident or injury could result from unexpected opera- tion, moving parts, or electric shock. If the owner is not familiar with machine servicing, this work should be done by a Yamaha water vehicle dealer or other qualified mechanic. Improperly serviced components could fail or stop operat- ing correctly, which could result in an accident.8 Modifications to this vehicle not approved by Yamaha may cause loss of performance or excessive noise, or ren- der it unsafe for use. Consult a Yamaha water vehicle dealer or other qualified mechanic before attempting any changes.E4-7]]></page><page Index="86" isMAC="true"><![CDATA[ENOTE:A service manual is available for purchase through a Yamaha water vehicle dealer for owners who have the mechanical skills, tools, and other equipment neces- sary to perform maintenance not covered by this owner’s/operator’s manual.OWNER’S MANUAL AND TOOL KITIt is advisable always to carry the Owner’s Manual and Tool Kit with you whenever you use the water vehicle. For the conve- nience of the user, a storage space is pro- vided on the vehicle.(Refer to “STORAGE CONTAINER / STORAGE COMPART- MENT”) To protect these materials from water, it would be a good idea to put them in a vinyl bag.The service information included in this manual is intended to provide you, the owner, with the necessary information for completing your own preventive mainte- nance and minor repairs. The tools pro- vided in the owner’s tool kit are sufficient for this purpose, except that a torque wrench is also necessary to properly tighten nuts and bolts.1 Storage space for tool kit and Owner’s Manual2 Tool kitqGP7-091wGP7-0924-8]]></page><page Index="87" isMAC="true"><![CDATA[EEJU00536PERIODIC INSPECTION CHARTFrequency of maintenance operations may be adjusted according to the operating conditions, but the following table gives general guidelines.The mark (●) indicates the checkups which you may do yourself. The mark (1) indicates work to be done by your Yamaha dealer.ItemMaintenance intervalInitialThereafter everyPage10 hours50 hours100 hours100 hours200 hours3 months6 months6 months12 monthsSpark plugInspection/Cleaning Adjustment●●●●4-15Greasing pointsGreasing●●4-16Bearing housingGreasing1*1●*2●*24-18Fuel systemInspection114-10Fuel filterChecking/Replacement114-11Fuel tankCleaning14-11Oil injection systemInspection/Cleaning114-12Carburetor settingInspection/Adjustment1114-22Trolling speedAdjustment●●4-22Carburetor throttle shaftInspection11—Cooling-water passagesCleaning/Flushing● (after every ride)4-1Bilge strainerCleaning●●●—ImpellerInspection●●●—Steering cableInspection●●4-13Steering pivotInspection1114-17Throttle cable and choke cableInspection/Adjustment●●4-13QSTSInspection●●4-14Drain plugsInspection/Replacement●—BatteryInspection● (Inspect fluid level before every ride)4-19Rubber couplingInspection1—Bolts and nutsRetightening111—*1: Grease capacity: 33.0~35.0 cm3 (1.11~1.18 oz.) *2: Grease capacity: 6.0~8.0 cm3 (0.20~0.27 oz.)4-9]]></page><page Index="88" isMAC="true"><![CDATA[EEJU00537aFUEL SYSTEM INSPECTIONwGasoline (Petrol) and its vapors are highly flammable and explosive. A fire or explo- sion can cause severe injury or death. Shut off the engine. Do not smoke. Avoid spilling gasoline. Do not drain the fuel while the engine is hot.Check the fuel system for leaks, cracks, or malfunctions. If any problem is found, do the necessary repair or replacement as required. If repair is necessary, consult your nearest Yamaha Water Vehicle deal- er.Checking points8 Carburetor leakage.8 Fuel pump malfunction or leakage. 8 Fuel tank leakage.8 Fuel hose joint leakage.8 Fuel hose cracks or other damage. 8 Fuel filter leakage.8 Fuel cock leakage.8 Air vent check valve leakage.wFailure to check for and repair fuel leak- age may result in fire or explosion.4-10]]></page><page Index="89" isMAC="true"><![CDATA[EqGP7-093EJU00539FUEL FILTERThe fuel filter is a one-piece, disposable type. The filter should be replaced once a year or after every 200 hours of operation, or if water is found in the filter, take the water vehicle to your Yamaha dealer if fuel filter replacement is required.1 Fuel filter wDo not try to change the fuel filter your- self. An incorrectly installed filter can leak gasoline (petrol), which could lead to fire or explosion. Take the water vehicle to your Yamaha dealer for fuel filter replace- ment.EJU00540FUEL TANKWhen the fuel tank needs to be cleaned or when any water is found in the fuel sys- tem, take the water vehicle to your Yamaha dealer for service.1 Fuel tankqGU0-0944-11]]></page><page Index="90" isMAC="true"><![CDATA[EEJU00544OIL INJECTION SYSTEM INSPECTIONCheck the oil injection system for leaks, cracks, or malfunctions. If any problem is found, do the necessary repair or replace- ment as required. If repair is necessary, consult your nearest Yamaha dealer.Checking points8 Check the oil tank for damage or cracks. 8 Check for water or dirt in the oil tank.8 Check the oil hose and joint.8 Check the oil filter.Oil tankCheck for oil tank damage or cracks. Check the oil hose and joint. When the oil tank need to be cleaned, or when any water or dirt is found in the oil tank, take the water vehicle to your Yamaha dealer for service.Oil filter cleaningIf the filter is clogged, remove it together with the oil level sender from the oil tank and clean it.GP7-0954-12]]></page><page Index="91" isMAC="true"><![CDATA[EAAGP7-096EJU00547STEERING CABLE INSPECTION1) Check the smooth operation of the handlebars and steering (jet) nozzle.2) Turn the handlebars from lock to lock and check that the distances between rear end of the steering (jet) nozzle and the nozzle at inside of the steer- ing (jet) nozzle are even on both right and left sides.A=BIf steering is stiff or misadjusted, ask your Yamaha dealer to service it.BBGP7-097Aq wGP7-0984-13EJU00550THROTTLE CABLE INSPECTION AND ADJUSTMENT1) By pulling or releasing the throttlelever, check that it moves back to the set position smoothly. If not, ask your Yamaha Water Vehicle dealer for ser- vice.2) Throttle lever free play should be within specification. If it is not, adjust it by loosening the lock nut and turn- ing the adjuster so that throttle lever free play is within specification with the carburetor at idle position.1 Lock nut 2 AdjusterThrottle lever play:A=4.0~7.0 mm (0.16~0.28 in)]]></page><page Index="92" isMAC="true"><![CDATA[EGP7-099EJU00551QUICK SHIFT TRIM SYSTEM MECHANISM INSPECTION1) Squeeze and release the shift lockrelease lever. It should move smooth- ly back to the lock position. Check that the trim shifting grip is locked with the lever released.2) Squeeze and hold the lever. Check that the grip turns smoothly.3) Check that the angle of the output nozzle changes to up or down from the middle position when the grip is shifted from neutral to bow-up or bow-down.If the mechanism does not work properly, ask your Yamaha Water Vehicle dealer to service it.GP7-100GP7-1014-14]]></page><page Index="93" isMAC="true"><![CDATA[EJU00552aSPARK-PLUG CLEANING AND ADJUSTMENTThe spark-plug is an important engine component and is easy to inspect. The condition of the spark-plug can indicate something about the condition of the engine. For example, if the centre elec- trode porcelain is very white, this could indicate an intake air leak or carburetion problem in that cylinder. Do not attempt to diagnose any problems yourself. Instead, take the water vehicle to a Yamaha Water Vehicle dealer. You should periodically remove and inspect the spark-plug because heat and deposits will cause the spark-plug to slowly break down and erode. If electrode erosion becomes excessive, or if carbon and other deposits are excessive, you should replace the spark-plug with another of the correct type.Before installing the spark-plug, measure the electrode gap with a wire thickness gauge; adjust the gap to specification if necessary.When fitting the plug, always clean the gasket surface and use a new gasket. Wipe off any dirt from the threads and screw in the spark-plug to the correct torque.NOTE:Before installing the spark plug cap, be sure to wipe off any water on the spark plug or inside the cap. Push the spark plug cap down until it clicks.NOTE:If a torque-wrench is not available when you are fitting a spark-plug, a good esti- mate of the correct torque (with a new gasket) is 1/4 to 1/2 a turn past finger- tight. Have the spark-plug adjusted to the correct torque as soon as possible with a torque wrench.wWhen removing or installing a spark plug, be careful not to damage the insulator. A damaged insulator could allow external sparks, which could lead to explosion or fire.Standard spark plug: BR-8ESESpark-plug gap: a0.6~0.7 mm (0.024 ~ 0.028 in)Spark-plug torque:25 Nm (2.5 m•kg, 18 ft•lb)aKA00654-15]]></page><page Index="94" isMAC="true"><![CDATA[EJU00553GREASING POINTSTo keep moving parts sliding or rotating smoothly, coat them with water resistant grease (Yamaha Marine Grease, YAMAHA grease A) or equivalent. Throttle cable and choke cable1) Grease the carburetor throttle cable and choke cable inner wires.2) Pull the throttle lever and remove the seal. Spray a rust-inhibitor into the outer cable. Refit the seal securely.1 SealqGP7-104GU0-102GU0-105GP7-1064-16EJU00554Oil pump cableGrease the oil pump cable inner wire.EJU00555Steering cable ball joints and inner wire1) Grease the steering cable ball joints both on the handlebar side and on the steering nozzle side.2) Extend the steering cable inner wire, and apply a thin coat of grease to it both on the handlebar side and on the steering nozzle side.E]]></page><page Index="95" isMAC="true"><![CDATA[EEJU00558Quick Shift Trim System cable joint and inner wire1) Grease the all joints of the system onthe under side of the seat storage com-partment and at the steering nozzle.2) Extend the inner wire of the trim shift cable under the seat storage compart- ment. Apply a thin coat of grease to the exposed wire. Repeat at the jetnozzle end.EJU00562Steering handle pivot shaftAfter removing the front storage compart- ment, grease the handle pivot shaft and bushing.If the steering shaft becomes loose, tight- en the band until a satisfactory feel is obtained.1 BandGP7-107aqGP7-1084-17]]></page><page Index="96" isMAC="true"><![CDATA[EqGU0-111EJU00566aBearing housingGrease the bearing housing through the grease nipple 1.This service should be done first after 10 hours or 1 month by your YAMAHA deal- er.Fill the bearing housing with water resis- tant grease through the grease nipple.After first service: Every 100 hours or 6 months (you may do this yourself)4-18Grease capacity:33.0~35.0 cm3 (1.11~1.18 oz)Grease capacity:6.0~8.0 cm3 (0.20~0.27 oz)]]></page><page Index="97" isMAC="true"><![CDATA[EqGP7-114EJU00570aCHOKE CABLE ADJUSTMENTPull the choke knob out until it stops. Release the knob. The knob should not move. If it moves back on its own, tighten the friction adjustment slightly. If the knob is difficult to move, loosen the friction adjustment slightly.1 Friction adjustmentEJU00572BATTERYCheck the level of the battery fluid and see if the terminals are tight. Add distilled water if the fluid level is low.cCBe careful not to place the battery on its side.When adding the battery fluid or recharg- ing, be sure to bring it out of the battery compartment.When checking the battery, make sure the breather pipe is connected to the bat- tery and not pinched shut by any part of the battery compartment.4-19]]></page><page Index="98" isMAC="true"><![CDATA[EwBattery electrolyte is poisonous and dan- gerous, causing severe burns, etc. Con- tains sulfuric acid. Avoid contact with skin, eyes or clothing.Antidote: EXTERNAL-Flush with water. INTERNAL-Drink large quantities of water or milk. Follow with milk of magnesia, beaten egg or vegetable oil. Call physi- cian immediately.Eyes: Flush with water for 15 minutes and get prompt medical attention. Batter- ies produce explosive gases. Keep sparks, flame, cigarettes, etc., away. Ventilate when charging or using in enclosed space. Always shield eyes when working near batteries.KEEP OUT OF REACH OF CHILDREN.Replenishing the battery fluidA poorly maintained battery will deterio- rate quickly. The battery fluid should be checked before every ride.1) The level should be between the upper and lower level marks. If refill- ing is necessary, use only distilled water.1 Upper level 2 Lower levelcCNormal tap water contains minerals which are harmful to a battery; therefore, refill only with distilled water.1 2KA0044-20]]></page><page Index="99" isMAC="true"><![CDATA[Rechargingw8 When charging the battery keep it well away from sparks and open flames, as it gives off explosive gases.8 When using a battery charger, connect the battery to the charger before you turn the charger on. This will prevent sparking at the terminals which could ignite battery gases.1) Remove the caps from the cells. Add distilled water if necessary to top up the electrolyte to the proper level.2) Connect the battery to a charger. Set the charging rate at 1.9 amps, and charge it for 10 hours.Connecting the battery terminalsAlways make sure the connections are cor- rect when you insert the battery in the water vehicle. Make sure that the breather pipe is properly connected and that it is not dam- aged or obstructed. Make sure the battery is securely held in place.1 Positive (+) — Red lead 2 Negative (–) — Black lead 3 Breather pipeEwq eGU0-1154-21]]></page><page Index="100" isMAC="true"><![CDATA[EJU00573CARBURETOR ADJUSTMENTThe carburetor is a vital part of the engine and requires very sophisticated adjust- ment. Most adjusting should be left to a Yamaha Water Vehicle dealer who has the professional knowledge and experi- ence to do so. However, the following point may be serviced by the owner as part of his usual maintenance routine.cCThe carburetor was set at the Yamaha factory after many tests. If the settings are disturbed without having technical knowledge, poor engine performance and damage may result.EJU00577Trolling speedPlace the water vehicle afloat. Start the engine and warm it up for one or two minutes. Using a diagnostic tachometer or, if necessary, the tachometer in the multifunction meter, adjust the engine speed to specification. Turn the throttle stop screw clockwise to increase engine speed or counterclockwise to decrease engine speed.1 Throttle stop screwNOTE:8 When possible, use a diagnostic tachometer for this procedure.8 When using the tachometer in the mul- tifunction meter, set engine speed as the meter indicates specified trolling speed.EqGU0-117WARNING56784 32101000 r/minMODEmphGP7-1184-22Trolling speed: 1,250~1,350 r/min]]></page><page Index="101" isMAC="true"><![CDATA[Ee wqrGU0-119EJU00578FUSE REPLACEMENTThe fuse is in the electrical box. To replace the fuse, remove the cap, pull out the red lead, and bring the fuse box out of the electrical box. Open the fuse box and replace the fuse.1 Electrical box 2 Cap3 Fuse (10A)4 Fuse boxwDo not use fuses of higher amperage that those recommended. Substitution of a fuse of improper rating can cause exten- sive electrical system damage and possi- ble fire.EJU00580BLEEDING THE OIL INJECTION PUMPIf the oil tank becomes completely empty or any hose connected to oil pump has been disconnected, the oil pump must be bled to ensure proper oil flow.If bleeding of the oil pump is necessary, take the water vehicle to your nearest Yamaha dealer.4-23]]></page><page Index="102" isMAC="true"><![CDATA[EeqGP7-121EJU00587aYAMAHA ADJUSTABLE SPONSON (Y.A.S.) ADJUSTMENT1) Loosen the cap nuts on both spon-son.2) Loosen the adjuster lock nut on eithersponson. Turn the adjuster to move the sponson up or down to the desired position.1 Cap nut2 Lock nut3 Adjuster4 Adjustment markscCDo not attempt to adjust the sponson without loosening the cap nuts. The adjuster mechanism can be damaged.3) Tighten the adjuster lock nut. Check the number of marks showing on the shaft of the adjuster, then repeat the adjustment procedure on the other sponson. Both sponsons should be adjusted to the same level.4) Tighten the cap nuts on both sponson securely. Do not overtighten.re wGP7-122UP DOWNTightening torque: 13Nm(1.3m•kg, 9.4ft•lb)GP7-1234-24]]></page><page Index="103" isMAC="true"><![CDATA[EJU00588SPECIFICATIONSEItemModelUnitGP800VEHICLE CAPACITYMaximum people on board Maximum load capacityNumber of people kg (lb)2160 (352)DIMENSIONSLength Width HeightDry Weightmm (in) mm (in) mm (in) kg (lb)2,860 (112.6) 1,120 (44.1) 970 (38.2) 226 (498)PERFORMANCEMaximum outputMaximum fuel consumptionCruising range/at full throttle Trolling speedkw (PS) @ r/min L/h (US gal/h, lmp gal/h) hr.r/min88.2 (120)/ @ 7,000 49 (12.9)1.01,250 ~ 1,350ENGINEEngine type Number of cylinder DisplacementBore & stroke Compression ratio Lubrication system Cooling system Starting system Ignition system Spark plugSpark plug gap Battery capacity Charging systemcm3 (cu.in) mm (in)NGK mm (in) V-AH2-stroke2784 (47.84)80.0 × 78.0 (3.15 × 3.07) 6.6Oil injection Water-Cooled Electric starter Digital CDI BR-8ES0.6 ~ 0.7 (0.024 ~ 0.028) 12-19Flywheel magnetoDRIVE UNITPropulsion systemJet pump type Impeller rotation TransmissionSteering (nozzle) angleDegreeJet pumpAxial flow, single stage Counter clockwise (Rear view) Direct drive from engine 23 + 23FUEL AND OILRecommended fuel Minimum fuel ratingRecommended engine oil Fuel tank capacityOil tank capacityPON RONL (US gal, lmp gal) L (US gal, Imp gal)Unleaded regular gasoline8690YAMALUBE 2-W or an equivalent TC-W3 certified outboard oil 50 (13.2,11)Including 8.8 (2.32,1.94) reserve 4.0 (1.06, 0.88)4-25]]></page><page Index="104" isMAC="true"><![CDATA[EJU00594Chapter 5 TROUBLESHOOTING AND EMERGENCYPROCEDURE 1 TROUBLESHOOTING..............................5-1 2Troubleshooting chart.......................5-1EMERGENCY PROCEDURES..................5-3 Cleaning the jet intakeand impeller........................................5-3 Connecting jumper cables ................5-4 3 Towing the water vehicle..................5-6 Submerged water vehicle .................5-7141516E111]]></page><page Index="105" isMAC="true"><![CDATA[EEJU00595TROUBLESHOOTINGIf any trouble happens on your water vehicle, use this section to check for the possible case.If you can not find the cause, or if the procedure for replacement or repair is not described on this owner’s manual, ask your Yamaha Water Vehicle dealer or qualified mechanic for the proper service.The trouble shooting chart contains “TROUBLE”, “POSSIBLE CAUSE”, “REMEDY”, “REFER PAGE”.Check the possible cause and remedy, and also the referred page for the maintenance steps, to solve the trouble.EJU00596aTROUBLESHOOTING CHARTTROUBLEPOSSIBLE CAUSEREMEDYRefer PageThe engine does not startStarter motor does not turn over8 Multifunction meter“LOCK” mode is selected8 Select “START” mode2-158 Stop switchLock plate is not in placeInstall lock plate2-78 FuseBurned out8 Replace the fuse and Check wiring4-238 BatteryRun down8 Recharge4-20Poor terminal connections8 Tighten as required4-21Terminal is eroded8 Clean—8 Starter componentFaulty8 Have a service at Yamaha dealer—Starter motor turns over8 Fuel cock“OFF” position8 Turn the fuel cock to “ON”2-68 FuelEmpty8 Refill as soon as possible*13-1Stale or contaminated8 Have service at Yamaha dealer4-108 Fuel tankWater or dust collected8 Have service at Yamaha dealer4-10Built-up pressure8 Open the fuel tank filler cap and release pressure2-68 Spark PlugFouled or defective8 Clean or Replace4-158 Spark Plug capNot fitted or loose8 Fit properly4-158 CrankcaseFilled with water8 Crank engine with plug out until clean5-78Fuel filterClogged or water collected8 Have service at Yamaha dealer4-118 ChokeKnob automatically return8 Tighten the choke cable tension adjust nut4-19*1 : Turn the fuel cock to “RES (reserve)” to return to shore.5-1]]></page><page Index="106" isMAC="true"><![CDATA[ETROUBLEPOSSIBLE CAUSEREMEDYRefer PageThe engine runs irregularly or stalls8 FuelEmpty8 Refill as soon as possible *13-1Stale or contaminated8 Have a service at Yamaha dealer4-108 ChokeKnob is left pulled8 Push it in fully2-88 Fuel FilterClogged or water collected8 Have service at Yamaha dealer4-118 Fuel tankWater or dust collected8 Have service at Yamaha dealer4-118 Spark PlugFouled or defective8 Replace4-15Incorrect heat range8 Replace4-15Gap incorrect8 Adjust4-158 Spark Plug capLoose8 Fit properly4-15Loose electrical connec- tions8 Tighten or connect properly—Cracked, torn, or damaged8 Replace—8 CarburetorIncorrect idle adjustment8 Adjust idle4-22Clogged8 Have service at Yamaha dealer—Warning indicator / symbol blinks8 Fuel levelEmpty8 Refill as soon as possible *13-18 Engine oil levelEmpty8 Refill immediately3-2Oil filter clogged8 Clean4-128 Engine overheatJet intake clogged*28 Clean5-38 Low battery voltageBattery voltage is too low8 Recharge4-21Wrong connection of battery terminal8 Connect properly4-21The water vehicle speeds too slow or loses power8 CavitationJet intake clogged8 Clean5-3Impeller damaged or worn8 Have service at Yamaha dealer—8 Engine overheatJet intake clogged*28 Clean5-38 Fuel FilterClogged8 Have service at Yamaha dealer4-118 Spark plugFouled or defective8 Replace4-15Incorrect heat range8 Replace4-15Gap incorrect8 Adjust4-158 Spark plug capsLoose8 Fit properly4-158 FuelStale or contaminated8 Have service at Yamaha dealer4-108 BilgeWater is accumulated in the vehicle8 Drain bilge3-5*1 : Turn the fuel cock to “RES (reserve)” to return to shore.*2 : Engine speed will be limited to 3,000 r/min by the overheat warning device.5-2]]></page><page Index="107" isMAC="true"><![CDATA[EEJU00597EMERGENCY PROCEDURESEJU00598aCLEANING THE JET INTAKE AND IMPELLERIf weeds or debris get caught in the intake or impeller, cavitation can occur, and though the engine speed rises, forward thrust will decrease. If this condition is allowed to continue, the engine will over- heat and may seize. If there is any sign that the jet intake or impeller is clogged with weeds or debris, beach the vehicle and check the intake and impeller. Always stop the engine before beaching the vehi- cle.wBefore attempting to remove weeds or debris from the jet intake or impeller areas, shut off the engine and remove the lock plate from the engine stop lanyard switch. Severe injury or death could result from coming in contact with the rotating parts of the jet pump.1) Turn the vehicle on its side as shown.cCPlace a suitable clean cloth or carpeting underneath the vehicle to protect it from abrasions and scratches, and always turn the vehicle over on its port (left) sides. When turning the vehicle on its side, sup- port the front portion so the handlebars cannot be bent or damaged.GP7-029GP7-1245-3]]></page><page Index="108" isMAC="true"><![CDATA[E2) Remove any weeds or debris from around the drive shaft, impeller, pump housing, and steering nozzle.If it is difficult to remove them, con- sult your Yamaha Water Vehicle deal- er.cCAlways avoid running your vehicle in areas where weed growth is thick. If trav- eling in weeded areas is unavoidable, run the engine alternately at partial-throttle and full-throttle. Weeds tend to accumu- late more at a steady speed and at trolling speed. If weeds clog the intake or impeller area and cause cavitation, follow the above cleaning procedure.EJU00599CONNECTING JUMPER CABLESIf the vehicle battery has run down, the engine can be started using a 12-volt bat- tery and jumper cables.wBattery electrolyte is poisonous and dan- gerous. It contains sulfuric acid which can cause severe burns. Avoid contact with skin, eyes or clothing.Antidote: EXTERNAL-Flush with water. INTERNAL-Drink large quantities of water or milk; follow with milk of magnesia, beaten egg, or vegetable oil. EYES-Flush with water for 15 minutes and get prompt medical attention.Batteries give off explosive gases. Keep sparks, flame, cigarettes, etc. well away. If using or charging the battery in an enclosed area, make sure that it is well ventilated. Always shield your eyes when working near batteries.5-4]]></page><page Index="109" isMAC="true"><![CDATA[EJU00600aTo connect the jumper cables1) Connect the positive (+) terminals of both batteries with the positive (red) jumper cable.2) Connect one end of the negative (black) jumper cable to the negative (–) terminal of the booster battery.3) Connect the other end of the negative (black) cable to an unpainted bolt on the cylinder head.cCDo not connect the end of the jumper cable to the negative (–) terminal on the vehicle battery! Be sure all connections are secure and correct before attempting to start the engine. Any wrong connec- tion may damage the electrical system.4) Start the engine, then disconnect the cables by reversing the above steps.cCDo not turn the starter motor for more than 5 seconds. The battely will be quick- ly discharged, which may be impossible to start the engine. Also, the starter motor may be damaged. If the engine does not start within 5 seconds, release the starter switch and try again after 15 seconds.1 Negative (black) jumper cable 2 Positive (red) jumper cable3 Booster batteryEqewGU0-1255-5]]></page><page Index="110" isMAC="true"><![CDATA[EEJU00603TOWING THE WATER VEHICLEIf the vehicle becomes inoperative in the water, it can be towed to shore. The bow must be kept up out of the water during towing to prevent water from entering the engine compartment.If the vehicle must be towed in an emer- gency using a tow rope, the operator should ride the vehicle, holding onto the handlebars.cC8 Tow the water vehicle slowly; water may enter the air intake and flood the engine compartment if the vehicle is towed too fast.8 Tow the vehicle using the bow eye only.1 Bow eye wIf the water vehicle is towed using a rope: 8 The water vehicle should only be towed in an emergency. The towing rope should be long enough so that the water vehicle will not collide with the towing boat when slowing down. A good rule of thumb is a tow rope which is three times the combined length of the towing boat and the water vehicle. A shorter length of rope can be used ifthe water vehicle is towed very slowly. 8 The operator of the towing boat must keep speed to a minimum and avoid traffic or obstacles which could be a hazard to the rider on the water vehi-cle.qGP7-1265-6]]></page><page Index="111" isMAC="true"><![CDATA[E5-7EJU00829SUBMERGED WATER VEHICLEIf the water vehicle is submerged or flooded with water, follow the procedure below and consult your Yamaha water vehicle dealer as soon as possible. Failure to do so may result in serious engine damage !1) Beach the vehicle and remove the drain plug(s) to drain the water from the engine compartment.2) Set the fuel cock to “OFF”.3) Remove the spark plugs and dry themwith a cloth.4) Without reinstalling the spark plugs,crank the engine until all the water inthe cylinders has been drained.5) Reinstall the drain plug(s) and thespark plugs.6) Set the fuel cock to “ON”.7) Launch the vehicle into the wateragain and run the engine for at least 10 minutes. If the engine will not start, repeat above steps.8) Turn the engine off. Set the fuel cock to “OFF”.9) Remove the cap(s) on the silencer cover and spray a rust inhibitor (such as Yamaha Stor-Rite Engine Fogging Oil) into the carburetor while cranking the engine.10) Have your vehicle inspected by a Yamaha water vehicle dealer as soon as possible.]]></page><page Index="112" isMAC="true"><![CDATA[EJU00608INDEX ........................................................6-1EChapter 6 INDEX112131415161]]></page><page Index="113" isMAC="true"><![CDATA[EEJU00609AINDEXEngine oil level meter............................2-18 Engine stop lanyard switch.....................2-7 Engine stop switch...................................2-7 Enjoy your water vehicle responsibly .1-17 FFilling the gasoline (petrol) tank .............3-1 Filling the oil tank .....................................3-2 Fire extinguisher ......................................3-6 Fishing vessel right-of-way ...................1-15 Front hood ................................................2-5 Front seat ..................................................2-4 Front storage compartment..................2-22 Fuel and engine oil ..................................3-4 Fuel cock ...................................................2-6 Fuel filter .................................................4-11 Fuel level meter......................................2-17 Fuel requirements ..................................1-18 Fuel system .......................................3-4, 4-5 Fuel system inspection..........................4-10 Fuel tank..................................................4-11 Fuel tank filler cap ....................................2-6 Fuse replacement...................................4-23 GGasohol ...................................................1-18 Gasoline (petrol) and engine oil filling ..3-1 Gasoline(petrol) .....................................1-18 Getting to know your water vehicle.....3-15 Give-way vessel .....................................1-13 Greasing points ......................................4-16 Grove compartment ..............................2-23 HHandgrips ...............................................2-12 Hazard information ................................1-11 Hour meter..............................................2-19 Hull identification number(H.I.N) ...........1-1Adjustment and maintenance ................4-7 Approval label of emission control certificate...................................................1-2 BBattery ......................................3-6, 4-5, 4-19 Beaching .................................................3-23 Bearing housing .....................................4-18 Bilge...........................................................3-5 Bleeding the oil injection pump ...........4-23 Boarding and starting in deep water ...3-18 Bow eye, rope holes, and cleat ............2-12 Break-in (running-in) procedure .............3-9 CCapsized water vehicle ..........................3-21 Carburetor adjustment ..........................4-22 Caution labels...........................................1-5 Check list ...................................................3-3 Check point ...............................................3-4 Checking points ............................4-10, 4-12 Choke cable adjustment........................4-19 Choke knob ...............................................2-8 Cleaning ....................................................4-6 Cleaning the jet intake and impeller ......5-3 Clock ........................................................2-18 Connecting jumper cables ......................5-4 Connecting the battery terminals.........4-21 Cooling system flushing .........................4-1 Cooling water pilot outlet ................2-9, 3-8 Crossing ..................................................1-14 Cruising limitations..................................1-8 DDocking ...................................................3-24EIEmergency procedures ...........................5-3 Emission control information ................1-2 Engine compartment ...............................3-4 Engine number.........................................1-1 Engine oil ................................................1-18Identification number records ................1-1 Important labels .......................................1-3 Installation .........................................2-4, 2-5 JJet intake...................................................3-76-1]]></page><page Index="114" isMAC="true"><![CDATA[LLabels ........................................................1-4 Learning to ride your water vehicle .....3-15 Limitations on who may operate the vehicle .......................................................1-7 Load limit ................................................3-20 Location of main components................2-1 Lubrication ................................................4-3 MManufactured date label .........................1-2 Meeting ...................................................1-14 Multifunction meter........................2-13, 3-8 NNarrow channels and bends.................1-15OOil filter cleaning ....................................4-12 Oil injection system inspection ............4-12 Oil pump cable .......................................4-16 Oil tank ....................................................4-12 Operation of controls and otherfunctions ...................................................2-4 Operational requirements.......................1-9 Other labels ..............................................1-6 Other special situations.........................1-15 Overheat warning system.....................2-11 Overtaking ..............................................1-15 Owner’s manual and tool kit ..................4-8 PPadloc (programmable digital locking ignition) ...................................................2-14 Periodic inspection chart.........................4-9 Personal watercraft industry association (PWIA) .....................................................1-17 Personal watercraft riders association (PWRA) ....................................................1-17 Post-operation checks ...........................3-26 Pre-operation checks ...............................3-3 Pri-i.d. number..........................................1-1 QQuick shift trim system (Q.S.T.S.) ........2-10Quick shift trim system cable joint and inner wire ................................................4-17 Quick shift trim system mechanism inspection ...............................................4-14 RReading buoys and other markers.......1-15 Rear seat ...................................................2-4 Recharging..............................................4-21 Removal ....................................................2-4 Replenishing the battery fluid ..............4-20 Riding with a passenger........................3-16 Riding your water vehicle .....................3-15 Rough water operation .........................3-24 Rules of the road ....................................1-13 Rules when encountering vessels .......1-14 SSafety information ...................................1-7 Sailing vessel right-of-way ...................1-15 Seat storage compartment ...................2-23 Shifting to “bow down” ........................2-11 Shifting to “bow up” .............................2-11 Spark-plug cleaning and adjustment...4-15 Specifications .........................................4-25 Speedometer ..........................................2-17 Stand-on vessel......................................1-13 Starter switch ...........................................2-8 Starting....................................................3-17 Starting from a landing jetty.................3-17 Starting in shallow water ......................3-17 Starting the engine ................................3-11 Steering .............................................2-9, 3-7 Steering and sailing rules and sound signals .....................................................1-13 Steering cable ball joints and innerwire ..........................................................4-16 Steering cable inspection......................4-13 Steering handle pivot shaft...................4-17 Stopping .................................................3-23 Stopping the engine ..............................3-14 Storage......................................................4-1 Storage compartments .........................2-22E6-2]]></page><page Index="115" isMAC="true"><![CDATA[ESubmerged water vehicle.......................5-7 Switches....................................................3-8 TTachometer ............................................2-16 Throttle......................................................3-7 Throttle cable and choke cable.............4-16 Throttle cable inspection and adjustment..............................................4-13 Throttle lever ............................................2-8 To change the trim angle of thevehicle .....................................................2-10 To connect the jumper cables ................5-5 To get more boating safetyinformation .............................................1-17 Towing the water vehicle........................5-6 Transportation........................................3-27 Trip meter ...............................................2-20 Trip timer ................................................2-19 Trolling speed ........................................4-22 Troubleshooting.......................................5-1 Troubleshooting chart.............................5-1 Turning....................................................3-22 UUnited states coast guard .....................1-17WWarning indicators ................................2-20 Warning labels .........................................1-4 Water separator .......................................3-5 Water vehicle characteristics................1-12 With a passenger ...................................3-19 YYamaha adjustable sponson (Y.A.S.) ..2-24 Yamaha adjustable sponson (Y.A.S.) adjustment..............................................4-246-3]]></page><page Index="116" isMAC="true"><![CDATA[EEJU00610LIMITED WARRANTYYAMAHA MOTOR CORPORATION, U.S.A.WATER VEHICLE LIMITED WARRANTYYamaha Motor Corporation is proud of its heritage and reputation for producing products with high standards of quality and workman- ship. Product excellence provides the cornerstone for our commitment to customer satisfaction. The Yamaha Water Vehicle Limited Warranty is your assurance of this commitment.This warranty provides you with protection against the expense of repairs for your water vehicle that are required as a result of defects in materials or workmanship. When maintained and utilized in the prescribed manner, you can count on your Yamaha water vehicle to provide reliable service.This warranty provides you with specific coverage and notes your responsibilities in maintaining and operating your water vehicle. Please take the time to read and become familiar with this warranty.PERIOD OF WARRANTY. Any new Yamaha water vehicle purchased for pleasure use from an authorized Yamaha water vehicle dealer in the United States, will be warranted against defects in material or workmanship for a period of one (1) year from date of purchase, sub- ject to exclusions noted herein. Any Yamaha Water Vehicle purchased and utilized for commercial applications will be warranted for a period of ninety [90] days from the date of purchase, subject to exclusions noted herein. Replacement parts used in warranty repairs will be warranted for the balance of the applicable warranty period.The warranty described here applies to water vehicles purchased and registered for use in the United States only. For warranty provi- sions outside the United States, contact the particular country’s local Yamaha distributor.OBTAINING REPAIRS UNDER WARRANTY. During the period of warranty, any authorized Yamaha water vehicle dealer will, free of charge, repair or replace, at Yamaha’s option, any parts adjudged defective by Yamaha due to faulty workmanship or material from the factory. All parts replaced under warranty will become the property of Yamaha Motor Corporation, U.S.A.CUSTOMER’S RESPONSIBILITY. Under the terms of this warranty, the customer will be responsible for ensuring that the water vehi- cle is properly operated, maintained, and stored as specified in the applicable Owner’s Manual.The owner of the water vehicle shall give notice to an authorized Yamaha water vehicle dealer of any and all apparent defects within ten [10] days of discovery and make the vehicle available at that time for inspection and repairs at the dealer’s place of business.GENERAL EXCLUSIONS FROM WARRANTY. This warranty will not cover the repair of damage if the damage is a result of abuse or neglect of the product. Examples of abuse and neglect include, but are not limited to:1. Racing or competition use, modification of original parts abnormal strain.2. Lack of proper maintenance and off season storage as described in the Owner’s Manual, installation of parts or accessories thatare not equivalent in design and quality to genuine Yamaha parts.3. Use of lubricants, oils, and fuel/oil mixtures that are not suitable for water vehicle motor use.4. Damage as a result of accidents, collisions, contact with foreign materials, or submersion.5. Growth of marine organisms on motor or hull surfaces.6. Normal deterioration.7. Gel coat stress cracks.SPECIFIC PARTS EXCLUDED FROM WARRANTY. Parts replaced due to normal wear or routine maintenance such as oil, spark plugs, fuel filters, impeller and liner, and anodes are not covered by warranty. Charges for transporting the water vehicle to and from an authorized Yamaha water vehicle dealer are excluded from warranty coverage.TRANSFER OF WARRANTY. Transfer of the warranty from the original purchaser to any subsequent purchaser is possible by having the vehicle inspected by an authorized Yamaha water vehicle dealer and requesting the dealer to submit a change of registration to Yamaha Motor Corporation. U.S.A. within ten [10] days of the transfer.YAMAHA MOTOR CORPORATION, U.S.A. MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED. ALL IMPLIED WAR- RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE OBLIGATIONS AND TIME LIMITS STATED IN THIS WARRANTY ARE HEREBY DISCLAIMED BY YAMAHA MOTOR CORPORATION, U.S.A. AND EXCLUDED FROM THIS WARRANTY.SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALSO EXCLUDED FROM THIS WARRANTY ARE ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING LOSS OF USE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.YAMAHA MOTOR CORPORATION, U.S.A. Post Office Box 6555 Cypress, California 906306-4]]></page><page Index="117" isMAC="true"><![CDATA[WARRANTY QUESTIONS AND ANSWERSQ. What costs are my responsibility during the warranty period?A. The customer’s responsibility includes all costs of normal maintenance services, non-warranty repairs, accident and collisiondamages.Q. What are some examples of “abnormal” strain, neglect, or abuse?A. These terms are general and overlap each other in areas. Specific examples include:Running the water vehicle out of oil, operating the machine with a broken or damaged part which causes another part to fail, and so on. If you have any specific questions on operation or maintenance, please contact your Yamaha water vehicle dealer for advice.Q. Does the warranty cover incidental costs such as transportation due to a failure? A. No. The warranty is limited to repair of the water vehicle itself.Q. May I perform any or all of the recommended maintenance shown in the Owner’s Manual instead of having the dealer do them? A. Yes, if you are a qualified mechanic and follow the procedures specified in the Owner’s and Service Manual. We do recommend,however, that items requiring special or equipment be done by a Yamaha water vehicle dealer.Q. Will the warranty be void or cancelled if Ido not operate or maintain my new water vehicle exactly as specified in the Owner’s Manual?A. No. The warranty on a new water vehicle cannot be “voided” or “cancelled”. However, if a particular failure is caused by opera- tion or maintenance other than as shown in the Owner’s Manual, that failure may not be covered under warranty.Q. What responsibility does my dealer have under this warranty? A. Each Yamaha water vehicle dealer is expected to:1. Completely set up each new water vehicle before sale.2. Explain the operation, maintenance, and warranty requirements to your satisfation at the time of sale, and upon your requestat any later date. In addition, each Yamaha water vehicle dealer is held responsible for his setup, service and warranty repair work.Q. Is the warranty transferable to second owners?A. Yes. The remainder of the existing warranty can be transferred upon request. The unit has to be inspected and re-registered byan authorized Yamaha water vehicle dealer for the policy to remain effective.CUSTOMER SERVICEIf your water vehicle requires warranty service, you must take it to any authorized Yamaha water vehicle dealer within the continental United States. Be sure to bring your warranty registration card or other valid proof of the original date of purchase. If a question or problem arises regarding warranty, first contact the owner of the dealership. Since all warranty matters are handled at the dealer level, this person is in the best position to help you. If you are still not satisfied and require additional assistance, please write:YAMAHA MOTOR CORPORATION U.S.A. CUSTOMER RELATIONS DEPARTMENT P.O. Box 6555Cypress, California 90630CHANGE OF ADDRESSThe federal government requires each manufacturer to maintain a complete, up-to-date list of all first purchasers against the possibil- ity of a safety-related defect and recall. This list is complied from the purchase registrations sent to Yamaha Motor Corporation, U.S.A. by the selling dealer at the time of your purchase.If you should move after you have purchased your new water vehicle, please advise us of your new address by sending a postcard listing your Yamaha model name, engine number, dealer number [or dealer’s name] as it is shown on your warranty card, your name and new mailing address.Mail to:YAMAHA MOTOR CORPORATION, U.S.A. P.O. Box 6555Cypress, California 90630 Attention: Warranty DepartmentThis will ensure that Yamaha Motor Corporation, U.S.A. has an up-to-date registration record in accordance with federal law.6-5]]></page><page Index="118" isMAC="true"><![CDATA[YAMAHA EXTENDED SERVICE (Y.E.S.)Keep your Yamaha protected even after your warranty expires with genuine Yamaha Extended Service (Y.E.S.).8 Y.E.S. is designed and administered by Yamaha Motor Corporation to provide maximum owner satisfaction. You get uninterrupted factory-backed coverage for extra peace of mind.8 Y.E.S. is flexible. You choose the plan that’s right for you: 12 months, 24 months, or 36 months beyond your warranty period.8 Y.E.S. is designed and administered by the same Yamaha people who handle your warranty — and it shows in the comprehensive coverage benefits. There are no mileage limitations. Coverage isn’t limited to “moving parts” or the “drive train” like many other plans. And Y.E.S. covers manufacturing defects just like the warranty. See the sample contract at your Yamaha dealer to see how comforting uninterrupted factory-backed protection can be.8 You don’t have to pay anything for covered repairs. There’s no deductible to pay, and repairs aren’t “pro-rated.” You don’t have any “out-of-pocket” expenses for covered repairs.8 In addition, Travel and Recreation Interruption Protection (TRIP) is included at no extra cost. TRIP gives you up to $150 reimbursement per occurrence for any reasonable expenses you incur because your Yamaha needs covered service: replacement vehicle rental, emergency towing, phone calls, even food and lodging when you are away from home. This superb cov- erage goes into effect when you purchase Y.E.S., so it applies to any warranty repairs as well as covered repairs during your entire Y.E.S. plan period.8 Y.E.S. coverage is honored at any authorized Yamaha dealer nationwide.8 Y.E.S. coverage is transferrable to a new owner if you sell or trade-in. That can make yourYamaha much more valuable!This excellent Y.E.S. plan coverage is only available to Yamaha owners like you, and only while your Yamaha is still within the Yamaha Limited Warranty period. So visit your authorized Yamaha dealer to get all the facts. He can show you how easy it is to protect your investment with Yamaha Extended Service.We urge you to act now. You’ll get the excellent benefits of TRIP coverage right away, and you’ll rest easy knowing you’ll have strong factory-backed protection even after your Yamaha Limited Warranty expires. You can also save money: Y.E.S. costs less within the first 90 days after you buy your Yamaha. See your dealer today!A special note:If visiting your dealer isn’t convenient, contact Yamaha with your Primary ID number (your engine number). We’ll be happy to help you get the Y.E.S. coverage you need.Yamaha Service Marketing P.O. Box 6555Cypress, CA 90630(714) 761-76316-6YEYAMAHA EXTENDED SERVICES]]></page><page Index="119" isMAC="true"><![CDATA[YAMAHA MOTOR CORPORATION, USAPrinted in U.S.A. Jun. 1999—?.?×1 CRGU0-F8199-13(GP800)Printed on recycled paper]]></page></pages></Search>