Page 75 - LIT-18626-11-70

UF4D13E0.book Page 70 Wednesday, March 15, 2017 11:08 AM

Trouble recovery

EJU34625 ways stop the engine before beaching the
Emergency procedures
watercraft.
EJU34635
Cleaning the jet intake and impeller
EWJ00783
WARNING
Before attempting to remove weeds or de-
bris from the jet intake or impeller area,
shut the engine off and remove the clip STOP
from the engine shut-off switch. Severe in-
jury or death could result from coming in
contact with the rotating parts of the jet
pump.
If weeds or debris gets caught in the jet intake
or impeller, cavitation can occur, causing jet
thrust to decrease even though engine speed
rises. If this condition is allowed to continue,
the engine will overheat and may seize.
NOTICE: If weeds or debris gets caught in
the jet intake, do not operate the water-
craft above trolling speed until they have
been removed. [ECJ00654]
If there is any sign that the jet intake or impel- (1) Place a suitable clean cloth or carpeting
ler is clogged with weeds or debris, return to underneath the watercraft to protect it
shore and check the intake and impeller. Al- from abrasions and scratches. Turn the
watercraft on its side as shown.
NOTICE: Always turn the watercraft
over onto its port (left) side. When
turning the watercraft on its side, sup-
port the bow so that the handlebars
are not bent or damaged. [ECJ00662]

70