Page 35 - LIT-18626-11-71

UF4E12E0.book Page 30 Thursday, June 15, 2017 1:12 PM

Control function operation

EJU31026 in the transmitter holder in the glove compart-
Watercraft control functions
ment, so that it is not lost.
EJU43910
Remote control transmitter 1
The Yamaha Security System and Low RPM
Mode settings can be selected by operating
the remote control transmitter. (See page 31
for Yamaha Security System setting proce-
dures and page 38 for Low RPM Mode acti-
vation procedures.)

1 Transmitter holder
ECJ00753
NOTICE
 The remote control transmitter is not
completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If the transmitter is
1 Remote control transmitter submerged, dry it with a soft, dry cloth,
Since the watercraft is programmed to rec- and then check that it is operating prop-
ognize the internal code from this transmitter erly. If the transmitter is not operating
only, the settings can only be selected with properly, contact a Yamaha dealer.
this transmitter.  Keep the remote control transmitter
If you accidentally lose your remote control away from high temperatures and do
transmitter or if it is not operating properly, not place it in direct sunlight.
contact a Yamaha dealer.  Do not drop the remote control trans-
When operating the watercraft, always keep mitter, subject it to strong shocks, or
the transmitter with you, such as by storing it place any heavy items on it.
 Use a soft, dry cloth to clean the remote
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
 Do not attempt to disassemble the re-
mote control transmitter yourself. Oth-
erwise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer. Refer
to local hazardous waste regulations
when disposing of transmitter batteries.

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following

30