Page 44 - LIT-18626-11-71

UF4E12E0.book Page 39 Thursday, June 15, 2017 1:12 PM

Watercraft operation

The “L-MODE” indicator light will come on
“L-
Number of Low RPM Mode MODE” when the engine is started.
beeps operation indicator
light
Comes
Activated
on
1 L-Mode
Deactivated Goes off
TIP:
If the remote control transmitter is operated
while the multifunction information center is
in the standby state, the center performs the
initial operation, and then the setting is se-
1 “L-Mode” (unlock) button
lected.
To activate the Low RPM Mode: 1 2
Push the “L-Mode” (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the “UNLOCK” indicator light blinks
three times, then comes on, the “L-MODE”
indicator light comes on and the Low RPM
Mode is activated.
TIP:
If the Low RPM Mode is activated immediate- 1 “UNLOCK” indicator light
ly after the information display turns off, the 2 “L-MODE” indicator light
“L-MODE” indicator light will not come on.
To deactivate the Low RPM Mode:
Push the “L-Mode” (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds two times and
the “UNLOCK” indicator light blinks two
times, then comes on, the “L-MODE” indica-
tor light goes off and the Low RPM Mode is
deactivated. When the Low RPM Mode is de-
activated, the watercraft returns to the nor-
mal operation mode.
EJU42484
No-wake mode
The no-wake mode is a function that main-
tains the engine speed at a fixed setting for
operating the watercraft at low speeds. This
function can be used only for forward water-

39