Page 49 - LIT-18626-11-71

UF4E12E0.book Page 44 Thursday, June 15, 2017 1:12 PM

Instrument operation

TIP: The outer numbers × 1000 r/min and display
“MPH” is selected as the display unit at the segments on the meter show the engine
Yamaha factory. speed.
To switch the speedometer display units:
Start the engine, stop the engine, and then
push the engine stop switch 3 times, pushing
the switch for 0.4 seconds or more each time,
before the multifunction information center
turns off. The speedometer display units
change.
To switch the speedometer display units
again, repeat this procedure.
1
1 Tachometer
EJU43891
Shift indicator
This indicator shows the reverse gate shift
positions: “F” (forward), “N” (neutral), and “R”
(reverse). (See page 36 for shifting proce-
dures.)
1

1 Engine stop switch

2

3

4
1
1 Shift indicator
2 “F” (Forward position)
3 “N” (Neutral position)
1 4 “R” (Reverse position)
1 Speedometer EJU31515
Fuel level meter
EJU31464
Tachometer The fuel level meter shows the amount of fuel
The tachometer shows the engine speed. remaining in the fuel tank. The amount of re-
maining fuel is shown using eight display
segments, which disappear two at a time as
the fuel level decreases.

44