Page 49 - LIT-18626-11-72

UF2T17E0.book Page 44 Thursday, June 22, 2017 3:15 PM

Instrument operation

EJU42241 segments and indicator lights come on. After
Multifunction information
2 seconds, the “WARNING” indicator light
center and the warning indicators in the information
The multifunction information center displays display go off, and then the center starts to
various watercraft information. operate normally.
1 2 3 4 5 6 TIP:
The “UNLOCK” indicator light will go off
when the engine is started.
Multifunction information center standby
state
If the multifunction information center does
not receive any operation input within 25 sec-
onds after the engine stops, the center will
turn off and enter a standby state. When the
7 8
engine is started again, the displays return to
1 Information display
their state before the center turned off, and
2 “UNLOCK” indicator light
then the center starts to operate normally.
3 Analog speedometer/tachometer
EJU42331
4 “WARNING” indicator light
Analog speedometer/tachometer
5 “L-MODE” indicator light
The analog speedometer/tachometer has
6 Multifunction display
both a speedometer function and a tachom-
7 “RPM” indicator light
eter function. By switching the meter, it can
8 “SPEED” indicator light
be used as either a speedometer or a ta-
chometer.
TIP:
1 2 3 4
The analog tachometer is selected at the
Yamaha factory.

1 “SPEED/RPM” button
2 “VOLT/HOUR” button
3 “START/STOP” button
4 “MODE/RESET” button
Multifunction information center initial op-
eration Analog tachometer
When the multifunction information center is The analog tachometer shows the engine
activated, the analog speedometer/tachome- speed.
ter makes one sweep, and all of the display

44