Page 51 - LIT-18626-11-72

UF2T17E0.book Page 46 Thursday, June 22, 2017 3:15 PM

Instrument operation

By switching the display units, the speed can the display units are switched from kilome-
be shown in kilometers per hour (km/h) or ters to miles only, the “SPEED” indicator light
miles per hour (mph). blinks three times.
TIP:
Miles are selected as the display units at the 1
Yamaha factory.

1 2

1 “VOLT/HOUR” button
2 “SPEED” indicator light
TIP:
1 Digital speedometer The display units can also be switched by
Digital speedometer display (mph) pushing the “START/STOP” button and
The “SPEED” indicator light blinks three “MODE/RESET” button simultaneously for at
times if miles are selected as the display units least 8 seconds.
when the multifunction information center is
activated.
1
TIP:
If the analog speedometer is selected, the
“SPEED” indicator light blinks three times,
2
then comes on.
Digital speedometer display (km/h)
The “SPEED” indicator light blinks once if ki-
lometers are selected as the display units
when the multifunction information center is
1 “START/STOP” button
activated.
2 “MODE/RESET” button
TIP:
EJU42261
If the analog speedometer is selected, the Hour meter/voltmeter
“SPEED” indicator light blinks once, then The hour meter/voltmeter has both an hour
comes on. meter function and a voltmeter function. By
To switch the digital speedometer display switching the meter, it can be used as either
units: an hour meter or a voltmeter.
Push the “VOLT/HOUR” button for at least 1
second, within 10 seconds after the multi-
function information center is activated. The
digital speedometer display changes. When

46