Page 57 - LIT-18626-11-72

UF2T17E0.book Page 52 Thursday, June 22, 2017 3:15 PM

Instrument operation

TIP: To start the measurements:
The actual fuel consumption varies greatly Push the “START/STOP” button for less than
depending on the operating conditions. Use 1 second. The beeper sounds once and the
this function as a reference only. measurements start.
To stop the measurements:
Push the “START/STOP” button for less than
1 second while the measurements are being
recorded. The beeper sounds once and the
measurements stop.
To restart the measurements:
Push the “START/STOP” button for less than
1 second while the measurements are
stopped. The beeper sounds once and the
measurements restart.
To reset the measurements:
Average speed/Tripmeter modes
Push the “MODE/RESET” button for at least
Average speed and distance traveled are re-
2 seconds while the measurements are
corded once the “START/STOP” button is
stopped. The beeper sounds twice and the
pushed to start the measurements, regard-
measurements are reset.
less of the current display.
TIP:
The measurements are performed only while
the engine is running.
The measurements are not saved if the en-
gine is stopped. The measurements are reset
automatically when the displays go off 25
seconds after the engine stops.

1

2

1 “START/STOP” button
2 “MODE/RESET” button

52