Page 89 - LIT-18626-11-72

UF2T17E0.book Page 84 Thursday, June 22, 2017 3:15 PM

Operation

proximately 110 m (360 ft) after the throttle le- EJU43443
Operating the watercraft in reverse or
ver is released or the engine is stopped,
neutral
although this distance will vary depending on
Operating in reverse
many factors, including gross weight, water
When the RiDE lever is squeezed, the “R” (re-
surface conditions, and wind direction.
verse) shift indicator will be displayed and the
watercraft will move in reverse. (See page 36
for shift system operation procedures.)
110 m (360 ft) 1

If the RiDE lever is squeezed to slow down,
the stopping distance is approximately 30%
shorter than when the RiDE lever is not used. 1 “R” (Reverse position)
However, this distance will vary depending
on many factors, including gross weight, wa-
ter surface conditions, and wind direction.
EWJ01791
WARNING
 Allow adequate stopping distance.
 Take early action to avoid collisions. Re-
member, watercraft and other boats do
not have brakes.
 Operate defensively at safe speeds and
keep a safe distance away from people,
Make sure that there are no obstacles or peo-
objects, and other watercraft to give you
ple behind you before shifting into reverse.
time to stop.
 Do not shut the engine off when slowing TIP:
down in case you need engine power to This model is equipped with a function which
steer away from a boat or other obstacle limits the engine speed in reverse.
that comes into your path. Operating in neutral
When the RiDE lever is squeezed lightly and
 To avoid rear-end collisions while oper-
released, the “N” (neutral) shift indicator will
ating the watercraft, check behind you
be displayed and the watercraft will stop in its
before using the RiDE lever to slow
down or stop the watercraft.

84