Page 46 - LIT-18626-11-73
P. 46

UF3J14E0.book  Page 41  Friday, June 23, 2017  9:47 AM



                        Watercraft operation

                        To deactivate the Low RPM Mode:       TIP:
                        Push the “L-Mode” (unlock) button on the re-  The beeps and the blinking digital speedom-
                        mote control transmitter for more than 4 sec-  eter display also indicate the activation of the
                        onds. Once the beeper sounds two times and  cruise assist. (See page 42 for information on
                        the “UNLOCK” indicator  light blinks  two  the cruise assist.)
                        times, then comes on, the “L-MODE” indica-  To activate the no-wake mode:
                        tor light goes off and the Low RPM Mode is  (1) Release the throttle lever and let the en-
                        deactivated. When the Low RPM Mode is de-  gine speed return to idle.
                        activated, the watercraft returns to the nor-  (2) Push and hold the “NO-WAKE MODE”
                        mal operation mode.                      switch.  Once  the beeper sounds three
                        EJU42484
                        No-wake mode                             times quickly and “8” (when kilometers
                        The no-wake mode is a function that main-  are selected) or “5” (when miles are se-
                        tains the engine speed at a fixed setting for  lected)  starts  blinking in the digital
                        operating the watercraft at low speeds. This  speedometer display, the no-wake
                        function can be used only for forward water-  mode is activated. Keep the throttle lever
                        craft operation or when the watercraft is in  in the fully closed (idle) position when the
                        neutral.                                 no-wake mode is activated.
                        TIP:                                  TIP:
                         The no-wake mode can only be activated  The digital speedometer display blinks con-
                          after 5 seconds have elapsed since starting  tinually while the no-wake mode is activated.
                          the engine.
                         If the no-wake mode is activated when the
                          watercraft is operating in neutral, the  re-                      1
                          verse gate will move to the forward posi-
                          tion.
                        Activating and deactivating the no-wake
                        mode
                        Activation of the no-wake mode will be con-
                        firmed by the number of beeps when the
                        “NO-WAKE MODE” switch is pushed, and by
                        the digital speedometer display of the multi-  1 “NO-WAKE MODE” switch
                        function information center. (See page 44 for
                        information on the multifunction information
                        center.)
                                                    Digital
                         Number  No-wake mode oper-
                         of beeps      ation      speedome-
                                                   ter display
                                                    Starts
                                      Activated
                                                    blinking
                                                    Stops
                                     Deactivated
                                                    blinking

                        41
   41   42   43   44   45   46   47   48   49   50   51