Page 50 - LIT-18626-11-73

UF3J14E0.book Page 45 Friday, June 23, 2017 9:47 AM

Instrument operation

The large outer numbers on the meter show then comes on, if “mph” are selected as the
the engine speed × 100 rpm (r/min). display units. (See page 45 for information on
The “RPM” indicator light comes on when the switching the digital speedometer display
analog tachometer is selected. units.)
To switch to the tachometer from the speed-
ometer: 1
Push the “SPEED/RPM” button for at least 1
second after the multifunction information
center is activated. When the meter switches
to the analog tachometer function, the
“RPM” indicator light comes on.

1 2
1 “SPEED/RPM” button
2 “SPEED” indicator light
EJU35027
Information display
The information display shows watercraft op-
erating conditions.
2
1 2 3 4
1 “SPEED/RPM” button
2 “RPM” indicator light
Analog speedometer
The analog speedometer shows the water-
craft speed against water.
The small inner numbers on the meter show
the watercraft speed in kilometers per hour
“km/h” and the large outer numbers show the 5 6 7
speed in miles per hour “mph”.
1 Fuel level meter
The “SPEED” indicator light comes on when 2 Fuel indicator
the analog speedometer is selected. 3 Hour meter/voltmeter
To switch to the speedometer from the ta- 4 Digital speedometer
chometer: 5 Engine overheat warning indicator
Push the “SPEED/RPM” button for at least 1 6 Check engine warning indicator
second after the multifunction information 7 Oil pressure warning indicator
center is activated. When the meter switches EJU42361
Digital speedometer
to the analog speedometer function, the
The digital speedometer shows the water-
“SPEED” indicator light comes on if “km/h”
craft speed against water.
are selected as the display units. The
“SPEED” indicator light blinks three times,

45