Page 55 - LIT-18626-11-73

UF3J14E0.book Page 50 Friday, June 23, 2017 9:47 AM

Instrument operation

as the shift position and jet thrust nozzle trim (reverse). (See page 36 for shifting proce-
angle. dures.)
1 2 3 1
2

3

4

1 Shift indicator 1 Shift indicator
2 Watercraft information 2 “F” (Forward position)
3 Trim indicator 3 “N” (Neutral position)
4 “R” (Reverse position)
The display units of the multifunction display
are selected according to the display units of EJU43190
Trim indicator
the digital speedometer. (To change the dis-
This indicator shows the trim angle of the jet
play units, see page 45 for digital speedome-
thrust nozzle. One of the two upper display
ter display selection procedures.)
segments will be shown when the trim angle
When “km/h” are selected as the display
is increased, and one of the two lower display
units of the digital speedometer, values are
segments will be shown when the trim angle
shown in kilometers/liters/degrees Celsius.
is decreased. When the neutral position of
When “mph” are selected as the display units
the jet thrust nozzle is selected, the middle
of the digital speedometer, values are shown
display segment will be shown. (See page 38
in miles/gallons/degrees Fahrenheit.
for trim angle selection procedures.)
EJU43181
Shift indicator
This indicator shows the reverse gate shift
positions: “F” (forward), “N” (neutral), and “R”
1

1 Trim indicator
EJU43201
Watercraft information
The multifunction display shows various wa-
tercraft and environmental information. To
switch the display mode, push the “MO-

50