Page 70 - LIT-18626-11-73
P. 70

UF3J14E0.book  Page 65  Friday, June 23, 2017  9:47 AM



                        Operation and handling requirements

                        (4) Pull the hood latch rearward, and then lift  of the fuel tank. Do not overfill the fuel
                            up the rear of the hood.             tank. Because fuel expands when it
                                                                 heats up, heat from the engine or the sun
                                   1                             can cause fuel to spill out of the fuel tank.
                                                                 Do not  leave the watercraft with  a full
                                                                 tank in direct sunlight.








                          1 Hood latch                                                1
                        (5) Loosen the fuel filler cap and remove it.                    2


                                                               1 Top of the fuel tank
                                                               2 Approximately 50 mm (2 in) from top of the
                                                                 fuel tank
                                                      1                                 1
                                                                                             2




                          1 Fuel filler cap
                        (6) Slowly add fuel to the fuel tank.
                          Fuel tank capacity:
                            70 L (18.5 US gal, 15.4 Imp.gal)
                                                               1 Top of the fuel tank
                                                               2 Approximately 50 mm (2 in) from top of the
                                                                 fuel tank
                                                              (8) Wipe up any spilled fuel immediately with
                                                                 a dry cloth.
                                                              (9) Securely install the fuel filler cap by tight-
                                                                 ening it until it clicks.
                                                              (10) Push the rear of the hood down to se-
                                                                 curely lock it in place. Make sure that the


                        (7) Stop filling  when the  fuel level reaches
                            approximately 50 mm (2 in) from the top


                        65
   65   66   67   68   69   70   71   72   73   74   75