Page 84 - LIT-18626-11-73
P. 84

UF3J14E0.book  Page 79  Friday, June 23, 2017  9:47 AM



                        Pre-operation checks

                        flood the engine compartment and cause  EJU40146
                                                              Post-launch checks
                        the watercraft to submerge. [ECJ00363]
                                                              Perform the post-launch checks in the pre-
                                                              operation checklist while the watercraft is in
                                                              the water and the engine is running.
                                                              To perform the post-launch checks:
                                                       2      (1) Launch the watercraft. (See page 82 for
                                                       1         information on launching the watercraft.)
                                                              (2) Perform the checks and make sure that
                                                                 there are no malfunctioning items or oth-
                                                                 er problems.
                                                              EJU41811
                                                              Cooling water pilot outlet check
                          1 Stern drain plug                  Make sure that water is discharged from the
                          2 O-ring
                                                              port (left) cooling water pilot outlet while the
                        Securely install the stern drain plugs by tight-  engine is running. (See page 35 for informa-
                        ening them until they stop.           tion on the cooling water pilot outlets.)
                                                         1












                          1 Stern drain plug                  EJU32715
                                                              Multifunction information center check
                        EJU41441
                        Hood check                            Make sure that the multifunction information
                        Push down on the rear of the hood and make  center operates properly. (See page 44 for in-
                        sure that it is securely closed.


















                        79
   79   80   81   82   83   84   85   86   87   88   89