Page 45 - LIT-18626-11-74

UF2W14E0.book Page 40 Thursday, June 15, 2017 11:29 AM

Watercraft operation

EJU40001
Watercraft operation modes “L-
Number of Low RPM Mode MODE”
beeps operation indicator
EJU36787 light
Low RPM Mode
Comes
The Low RPM Mode is a function that limits Activated
on
the maximum engine speed to approximately
Deactivated Goes off
70% of the maximum engine speed in the
normal mode. TIP:
The Low RPM Mode can only be activated If the remote control transmitter is operated
and deactivated by operating the remote while the multifunction information center is
control transmitter that is included with this in the standby state, the center performs the
watercraft. (See page 30 for information on initial operation, and then the setting is se-
the remote control transmitter.) lected.
To activate the Low RPM Mode:
Push the “L-Mode” (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the “UNLOCK” indicator light blinks
three times, then comes on, the “L-MODE”
indicator light comes on and the Low RPM
Mode is activated.
TIP:
If the Low RPM Mode is activated immediate-
1 Remote control transmitter
ly after the information display turns off, the
TIP: “L-MODE” indicator light will not come on.
The Low RPM Mode can only be activated
when the engine is stopped in the unlock
mode of the Yamaha Security System.
Activating and deactivating the Low RPM
Mode
Activation of the Low RPM Mode will be con-
firmed by the number of beeps when the re-
mote control transmitter is operated, and by
the “L-MODE” indicator light of the multifunc-
tion information center. (See page 42 for in-
formation on the multifunction information
center.)

40