Page 50 - LIT-18626-11-74

UF2W14E0.book Page 45 Thursday, June 15, 2017 11:29 AM

Instrument operation

EJU43901 higher speeds could result in severe en-
Engine overheat warning
If the engine temperature rises significantly, gine damage. [ECJ00042]
the engine overheat warning indicator, the
check engine warning indicator, and the
“WARNING” indicator light blink, and the
buzzer sounds intermittently. After 5 sec-
onds, the engine overheat warning indicator
and the “WARNING” indicator light stop
blinking and remain on, and the buzzer
sounds continuously. After 30 seconds, the
buzzer stops. While the engine overheat
warning is activated, the maximum engine
EJU43731
speed is limited. Check engine warning
If a sensor malfunction or a short circuit is de-
tected, the check engine warning indicator
and the “WARNING” indicator light blink, and
the buzzer sounds intermittently for 30 sec-
onds.
If the engine is stopped after the check en-
gine warning is activated, the information dis-
play will indicate an error code.

If the engine overheat warning is activated,
immediately reduce the engine speed, return
to shore, and then make sure that water is
being discharged from the cooling water pilot
outlet while the engine is running. If there is
no discharge of water, stop the engine, and
then check the jet intake for clogging. (See
page 97 for information on the jet intake.)
NOTICE: If you cannot locate and correct If the check engine warning is activated, im-
the cause of the overheating, consult a mediately reduce the engine speed, return to
Yamaha dealer. Continuing to operate at shore, and have a Yamaha dealer check the
engine.
EJU43740
Hour meter
The hour meter shows the total number of
hours that the engine has been running since
the watercraft was new.

45