Page 62 - LIT-18626-11-74

UF2W14E0.book Page 57 Thursday, June 15, 2017 11:29 AM

Operation and handling requirements

(2) Remove the seats. (See page 47 for seat (6) Loosen the engine oil filler cap and re-
removal and installation procedures.) move it.
(3) Remove the dipstick and wipe it clean.

1
1

1 Engine oil filler cap
1 Dipstick
(7) Slowly add engine oil.
(4) Insert the dipstick back into the dipstick TIP:
tube completely. Remove the dipstick The difference between the minimum and
again and make sure that the engine oil maximum level marks on the dipstick is equal
level is between the minimum and maxi- to approximately 1 L (1.06 US qt, 0.88 Imp.qt)
mum level marks. of engine oil.
(8) Wait approximately 5 minutes to allow
the engine oil to settle, and then check
the engine oil level again.
(9) Repeat steps 3–8 until the engine oil is at
1 the proper level.
(10) Securely install the engine oil filler cap by
2
tightening it until it stops.
(11) Securely install the seats in their original
positions.

1 Maximum level mark
2 Minimum level mark
(5) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha dealer. If the engine oil level is
below the minimum level mark, add en-
gine oil.

57