Page 48 - LIT-18626-11-75

UF4G12E0.book Page 43 Tuesday, August 1, 2017 10:17 AM

Instrument operation

EJU43760 turn off and enter a standby state. When the
Multifunction information
engine is started again, the displays return to
center their state before the center turned off, and
The multifunction information center displays then the center starts to operate normally.
various watercraft information. EJU35027
Information display
1 2 3 The information display shows watercraft op-
erating conditions.
1 2

4
1 “UNLOCK” indicator light (VX Deluxe /
VX Cruiser / VX Limited)
2 Information display 3 4 5 6 7 8
3 “L-MODE” indicator light (VX Deluxe / 1 Tachometer
VX Cruiser / VX Limited)
2 Speedometer
4 “WARNING” indicator light
3 Oil pressure warning indicator
Multifunction information center initial op- 4 Engine overheat warning indicator
eration 5 Check engine warning indicator
When the multifunction information center is 6 Shift indicator
activated, all of the display segments come 7 Fuel level warning indicator
8 Fuel level meter
on. After 2 seconds, the warning indicators in
the information display go off, and then the EJU43832
Speedometer
center starts to operate normally.
The speedometer shows the watercraft
If only the multifunction information center is
speed against water.
activated, the “WARNING” indicator light
blinks once.
TIP:
VX Deluxe / VX Cruiser / VX Limited: The
“UNLOCK” indicator light also comes on as
part of the initial operation.
The “UNLOCK” indicator light will go off
when the engine is started.
Multifunction information center standby
state 1
If the multifunction information center does 1 Speedometer
not receive any operation input within 25 sec-
onds after the engine stops, the center will

43