Page 72 - LIT-18626-11-75

UF4G12E0.book Page 67 Tuesday, August 1, 2017 10:17 AM

Pre-operation checks

right and left fully turned positions of the jet lever returns automatically to its fully closed
thrust nozzle. position when released.

EJU42181
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.

EJU40113
Remote control transmitter check
Difference between fully turned posi- (VX Deluxe / VX Cruiser / VX Limited)
tions of jet thrust nozzle (distances A
and B): Make sure that the remote control transmitter
Maximum 5 mm (0.20 in) operates properly. (See page 31 for Yamaha
Security System setting procedures and
EJU43213 page 38 for Low RPM Mode activation pro-
RiDE lever checks
cedures.)
Operate the RiDE lever several times to make
EJU32664
sure that operation is smooth throughout the Engine shut-off cord (lanyard) check
whole range. Also, make sure that the RiDE Make sure that the engine shut-off cord (lan-
yard) is not damaged. If the cord is damaged,
replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it

67