Page 75 - LIT-18626-11-75

UF4G12E0.book Page 70 Tuesday, August 1, 2017 10:17 AM

Pre-operation checks

Securely install the stern drain plugs by tight- running. (See page 34 for information on the
ening them until they stop. cooling water pilot outlet.)

1

1 Stern drain plug
EJU32715
Multifunction information center check
EJU43810
Hood check Make sure that the multifunction information
Push down the hood latch and make sure center operates properly. (See page 43 for in-
that it is securely closed. formation on proper operation of the multi-
function information center.)

EJU40146
Post-launch checks
EJU43392
Perform the post-launch checks in the pre- Shift system check
operation checklist while the watercraft is in Operate the throttle lever and RiDE lever, and
the water and the engine is running. check that the watercraft moves or does not
To perform the post-launch checks: move according to the displayed shift indica-
(1) Launch the watercraft. (See page 73 for tor. (See page 36 for shift system operation
information on launching the watercraft.) procedures.) WARNING! To avoid colli-
(2) Perform the checks and make sure that sions, operate at safe speeds and keep a
there are no malfunctioning items or oth-
er problems.
EJU40553
Cooling water pilot outlet check
Make sure that water is discharged from the
cooling water pilot outlet while the engine is

70