Page 113 - LIT-18626-12-10

UF3V10E0.book Page 108 Thursday, August 23, 2018 9:17 AM

Trouble recovery

(1) Connect the positive (+) jumper cable to EJU43482
Replacing the fuses
the positive (+) battery terminals of both
If a fuse is blown, replace it with the proper
batteries.
fuse.
(2) Connect one end of the negative (–)
jumper cable to the negative (–) battery 1 2
terminal of the booster battery.
(3) Connect the other end of the negative (–)
jumper cable to an engine hanger.
2
1
3

4
1 Good fuse
2 Blown fuse

1 2
1 Negative (–) jumper cable
2 Booster battery
3 Positive (+) jumper cable
4 Engine hanger
(4) Start the engine, and then disconnect the
jumper cables by reversing the steps
above. (See page 32 for information on
starting the engine.)
1 Good fuse
2 Blown fuse
To replace a fuse:
(1) Remove the seats and removable water-
tight storage compartment. (See page 55
for seat removal and installation proce-
dures and page 60 for information on the
removable watertight storage compart-
ment.)
(2) While pushing the projection on each
lock, slide the locks outward.

108