Page 36 - LIT-18626-12-10

UF3V10E0.book Page 31 Thursday, August 23, 2018 9:17 AM

Control function operation

EJU31026 (2) Tap the lock or unlock mode indicator on
Watercraft control functions
the multifunction information center.
EJU45090
Yamaha Security System (3) Flick up or down to set each digit of the
The Yamaha Security System functions to 4-digit PIN, and then tap the “Enter” but-
help prevent unauthorized use or theft of the ton.
watercraft. The lock and unlock modes of the
security system can be selected using the
engine lock screen of the multifunction infor- Enter PIN
mation center. The engine cannot be started 9 9 9 9
if the lock mode of the security system is se- 0 0 0 0
lected. The engine can only be started if the 1 1 1 1
unlock mode is selected.
Enter
TIP:
The Yamaha Security System setting can
only be selected while the engine is stopped.
EJU45100 TIP:
Yamaha Security System setting The default setting for the PIN is “1234”. The
The Yamaha Security System setting can be
PIN can also be changed. (See page 50 for in-
confirmed by the lock or unlock mode indica-
formation on changing the PIN.)
tor on the multifunction information center.
(4) Tap “ON” to select the lock mode of the
1 Yamaha Security System or tap “OFF” to
select the unlock mode, and then tap
“Save”.
2
Engine Lock

1 Lock mode indicator
ON OFF
2 Unlock mode indicator
To select the lock or unlock mode of the
Save
Yamaha Security System:
(1) Stop the engine.
TIP:
If the multifunction information center is
(5) The beeper sounds once when the lock
turned off because the engine is stopped,
mode of the Yamaha Security System is
perform one of the following operations to
selected and two times when the unlock
turn on the center without starting the engine.
mode is selected, and the multifunction
 Push the start switch briefly.
information center returns to the home
 While pushing the engine stop switch,
screen.
push the start switch.

31