Page 43 - LIT-18626-12-10

UF3V10E0.book Page 38 Thursday, August 23, 2018 9:17 AM

Watercraft operation

TIP: This function can be used only for forward
If the RiDE lever is squeezed while the throttle operation of the watercraft.
lever is squeezed, the watercraft will slow TIP:
down, and once stopped, move in reverse.  When the watercraft is moving in reverse or
To shift into neutral from forward: is in neutral, the jet thrust nozzle will auto-
(1) Release the throttle lever. matically change to the neutral trim setting.
(2) Lightly squeeze and release the RiDE le- When the watercraft is shifted into forward,
ver. The “N” (neutral) shift indicator will the jet thrust nozzle will automatically
be displayed. change to the selected trim setting.
 While the watercraft is in neutral, the
“TRIM/T.D.E.” switches control the forward
and reverse operation of the T.D.E. (thrust
direction enhancer). (See page 40 for infor-
mation on the T.D.E.)
 The watercraft performance characteristics
according to the trim angle change de-
pending on the operating conditions.
Confirming the trim setting
The trim setting can be confirmed by the trim
setting indicator and trim setting level on the
multifunction information center.
2 1
MPH

0 100%
13.6V x100 N MPH
RPM
1 +2 100%
1 “N” (Neutral position)
13.6V x100 F
TIP: 1 Trim setting indicator RPM
If the RiDE lever is squeezed continuously, 2 Trim setting level
the reverse gate will move to the reverse po-
To change the trim setting:
sition.
(1) Shift into forward.
EJU45041
Electric trim system (2) Push the “TRIM/T.D.E.” up switch to in-
The electric trim system is a function for crease the trim setting and raise the bow,
changing the vertical angle of the jet thrust or push the “TRIM/T.D.E.” down switch
nozzle to change the trim angle and perfor- to decrease the trim setting and lower
mance characteristics of the watercraft.

38