Page 49 - LIT-18626-12-10

UF3V10E0.book Page 44 Thursday, August 23, 2018 9:17 AM

Watercraft operation

and the acceleration setting under “Ac- To unlock the drive control mode screen:
cel.” (1) Release the throttle lever and let the en-
gine speed return to idle.
1 2
(2) Tap the drive control mode indicator on
Speed Accel. the multifunction information center.
45 MPH Slow (3) The PIN entry screen will be displayed.
35 MPH Normal Flick up or down to set each digit of the
55 MPH Slow 4-digit PIN, and then tap the “Enter” but-
ton.
Save
(4) Tap the “Lock” button.
(5) Tap the “OFF” button.
(6) Tap the “Save” button to complete the
1 Maximum watercraft speed setting
setting and return to the “Drive Control”
2 Acceleration setting
screen.
(4) Tap the “Save” button to complete the EJU45021
Cruise assist
settings and return to the previous dis-
The cruise assist is a function for maintaining
play.
a desired engine speed within a fixed range
To lock the drive control mode screen:
while operating the watercraft. Once the
(1) Release the throttle lever and let the en-
cruise assist is activated, the set engine
gine speed return to idle.
speed can be increased or decreased. How-
(2) Tap the drive control mode indicator on
ever, the adjustment is limited to a maximum
the multifunction information center.
of five increments above or below the initial
(3) Tap the “Lock” button.
cruise assist setting.
(4) The PIN entry screen will be displayed.
Flick up or down to set each digit of the TIP:
4-digit PIN, and then tap the “Enter” but- The cruise assist can only be set between en-
ton. gine speeds of approximately 3000 r/min and
(5) Tap the “ON” button. approximately 7000 r/min.
Drive Control Lock

ON OFF

Save

(6) Tap the “Save” button to complete the
setting and return to the “Drive Control”
screen.

44