Page 66 - LIT-18626-12-10

UF3V10E0.book Page 61 Thursday, August 23, 2018 9:17 AM

Equipment operation

To open the removable watertight storage EJU42391
Fire extinguisher holder and cover
compartment:
The fire extinguisher holder and cover are lo-
(1) Remove the rear seat. (See page 55 for
cated in the bow storage compartment.
seat removal and installation proce-
To use the fire extinguisher holder and cover:
dures.)
(1) Pull the hood latch rearward, and then lift
(2) Loosen the cap and remove it.
up the rear of the hood.
1

1

1 Cap
1 Hood latch
(2) Unhook the band and remove the fire ex-
tinguisher cover.

1

1 2

1 Removable watertight storage compart-
ment
Removable watertight storage compart- 1 Fire extinguisher holder and cover
ment: 2 Band
Capacity:
9.0 L (2.4 US gal, 2.0 Imp.gal) (3) Place the fire extinguisher in the holder,
Load limit: and then place the cover over the fire ex-
3.0 kg (7 lb) tinguisher.
(4) Securely fasten the cover and the fire ex-
To close the removable watertight storage
tinguisher with the band.
compartment:
(5) Push the rear of the hood down to se-
(1) Securely install the cap by tightening it
curely lock it in place. Make sure that the
until it stops.
(2) Securely install the rear seat in its original
position.

61