Page 52 - LIT-18626-12-11

UF3X10E0.book Page 47 Tuesday, August 7, 2018 2:42 PM

Instrument operation

EJU45121 symbol in the warning bar that is displayed
Operation buttons
when a warning is activated.
This model is equipped with operation but-
tons that can be used in addition to touching 1
the multifunction information center.

1 2 MPH
0 100%

13.6V x100 N
RPM
2
1 Screen tab bar
1 “MENU SCROLL” button 2 Center display
2 “ALARM MUTE” button
“MENU SCROLL” button
Each time this button is pushed, the multi-
function information center switches in the
following order. 1
Home screen → Information screen (“Trip In- 1 Warning bar
fo”) → Information screen (“Fuel Info”) →
Screen tab bar
Home screen
When each symbol is tapped, the watercraft
“ALARM MUTE” button information, function settings, and other in-
Push this button to stop the buzzer when a
formation are shown in the center display.
warning is activated. If this button is pushed
(See page 48 for information on each screen.)
again while the warning is still activated, the
Center display
buzzer will start sounding again.
The center display shows the watercraft in-
TIP: formation, function settings, and other infor-
 The operation sounds cannot be turned off. mation according to the symbol on the
 If the “ALARM MUTE” button was pushed screen tab bar that is tapped.
to stop the buzzer, the buzzer will start Warning bar
sounding again after 5 minutes. The warning bar is shown instead of the ta-
EJU45131 chometer value display only when an error or
Touch screen
malfunction is detected.
The touch operations are enabled only for the
When the warning symbol is tapped, the
screen tab bar, the items and sliders that are
warning description, error code, and other in-
shown in the center display, and the warning
formation are shown in the center display.
(See page 52 for information about the warn-
ing descriptions.)

47