Page 70 - LIT-18626-12-11

UF3X10E0.book Page 65 Tuesday, August 7, 2018 2:42 PM

Operation and handling requirements

EJU40291 (2) Remove the seats. (See page 55 for seat
Engine oil requirements
removal and installation procedures.)
EJU31897
Engine oil (3) Remove the dipstick and wipe it clean.
ECJ00282
NOTICE
Use only 4-stroke engine oil. Usage of 2- 1
stroke engine oil could result in severe en-
gine damage.

Recommended engine oil:
YAMALUBE 4W
Recommended engine oil type:
SAE 10W-30, 10W-40, 20W-40,
20W-50
1 Dipstick
Recommended engine oil grade:
API SJ, SL (4) Insert the dipstick back into the dipstick
tube completely. Remove the dipstick
TIP: again and make sure that the engine oil
When the engine is operated at high speeds, level is between the minimum and maxi-
some engine oil may be consumed. Be sure mum level marks.
to check the engine oil level.
Checking the engine oil level
EWJ00341
WARNING
Engine oil is extremely hot immediately af-
1
ter the engine is turned off. Coming in con-
tact with or getting any engine oil on your 2
clothes could result in burns.

ECJ01002
NOTICE
1 Maximum level mark
Make sure that debris and water do not 2 Minimum level mark
enter the oil filler hole. Debris and water in
(5) If the engine oil level is significantly
the engine oil can cause serious engine
above the maximum level mark, consult
damage.
a Yamaha dealer. If the engine oil level is
To check the engine oil level: below the minimum level mark, add en-
(1) Place the watercraft in a precisely level gine oil.
position on land with the engine
stopped. If the engine was running, allow
the engine oil to settle by waiting 5 min-
utes or more before checking the oil lev-
el.

65