Page 37 - LIT-18626-12-12

UF3P12E0.book Page 32 Monday, July 23, 2018 9:51 AM

Control function operation

two conditions: (1) this device may not cause
“UN-
harmful interference, and (2) this device must Number of Yamaha Security LOCK” in-
accept any interference received, including beeps System mode dicator
light
interference that may cause undesired oper-
ation. Lock Goes off
ECJ00031 Unlock Comes
NOTICE (normal operation on
mode)
Changes or modifications not expressly
Unlock Comes
approved by the party responsible for (Low RPM Mode) on
compliance could void the user’s authority
to operate the remote control transmitter. TIP:
 The beeper sounds two times for the nor-
EJU31385
Yamaha Security System mal operation mode or three times for the
The Yamaha Security System functions to Low RPM Mode. (See page 41 for Low
help prevent unauthorized use or theft of the RPM Mode activation procedures.)
watercraft. The lock and unlock modes of the  If the remote control transmitter is operated
security system can be selected by operating while the multifunction information center
the remote control transmitter that is included is in the standby state, the center will per-
with this watercraft. The engine cannot be form the initial operation, and then the set-
started if the lock mode of the security sys- ting is selected.
tem is selected. The engine can only be start- To select the lock mode:
ed if the unlock mode is selected. (See page Push the lock button on the remote control
31 for information on the remote control transmitter briefly. The beeper sounds once
transmitter.) and the “UNLOCK” indicator light blinks
once, then goes off. This indicates the lock
TIP:
mode is selected.
The Yamaha Security System settings can
only be selected while the engine is stopped. 2
1
EJU36776
Yamaha Security System settings
The Yamaha Security System settings will be
confirmed by the number of beeps when the
remote control transmitter is operated, and
by the “UNLOCK” indicator light of the multi-
function information center. (See page 43 for
information on the multifunction information
center.)
1 Lock button
2 “UNLOCK” indicator light
To select the unlock mode:
Push the “L-Mode” (unlock) button on the re-
mote control transmitter briefly. The beeper
sounds two or three times and the “UN-

32