Page 38 - LIT-18626-12-12

UF3P12E0.book Page 33 Monday, July 23, 2018 9:51 AM

Control function operation

LOCK” indicator light blinks two or three Insert the clip under the engine shut-off
times, then comes on. This indicates the un- switch before starting the engine.
lock mode is selected.
1
1 L-Mode 2

2

3
1 Engine shut-off switch
1 “L-Mode” (unlock) button 2 Clip
2 “UNLOCK” indicator light 3 Engine shut-off cord (lanyard)
EJU31153 When the engine is not running, remove the
Engine stop switch “ ”
clip from the engine shut-off switch to pre-
The engine stop switch (red button) stops the
vent accidental starting or unauthorized op-
engine when the switch is pushed.
eration by children or others.

1

1 Engine stop switch
EJU42323
EJU31164 Start switch “ ”
Engine shut-off switch “ ”
ECJ01311
The engine shut-off switch automatically NOTICE
stops the engine when the clip, on the end of
Do not run the engine over 4000 r/min on
the engine shut-off cord (lanyard), is removed
land. Also, do not run the engine for more
from the switch, such as if the operator falls
than 15 seconds without supplying water,
off the watercraft.
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start

33