Page 73 - LIT-18626-12-12

UF3P12E0.book Page 68 Monday, July 23, 2018 9:51 AM

Pre-operation checks

yard) may not pull free when the operator To check the operation of the switches:
falls off, allowing the watercraft to contin- (1) If the lock mode is selected for the
ue to run and cause an accident. [EWJ01221] Yamaha Security System setting, select
the unlock mode. (See page 32 for
Yamaha Security System setting proce-
dures.)
(2) Push the start switch to make sure that
the engine starts.
(3) As soon as the engine starts running,
push the engine stop switch to make
sure that the engine stops immediately.
(4) Restart the engine, and then pull the en-
gine shut-off cord (lanyard) to remove
EJU32676 the clip from the engine shut-off switch
Switch checks
to make sure that the engine stops im-
ECJ01311
NOTICE mediately.
EJU40102
Do not run the engine over 4000 r/min on Storage compartment checks
land. Also, do not run the engine for more Make sure that the storage compartments
than 15 seconds without supplying water, are not damaged and that water has not col-
otherwise the engine could overheat. lected in the compartments. (See page 51 for
information on the storage compartments.)
Check the start switch, the engine stop EJU43800
switch, and the engine shut-off switch for Fire extinguisher holder, cover, and band
proper operation. (See pages 33 to 33 for in- checks
Make sure that the fire extinguisher holder,
formation on operating each switch.)
cover, and band are not damaged and that
1 2 3 the fire extinguisher is securely held in place
using the band. (See page 53 for information
on the fire extinguisher holder, cover, and
band.)

4
5
1 Clip
2 Engine shut-off switch
3 Start switch
4 Engine stop switch
5 Engine shut-off cord (lanyard)

68