Page 105 - LIT-18626-12-13

UF2W15E0.book Page 100 Monday, July 9, 2018 4:26 PM

Trouble recovery

(1) Connect the positive (+) jumper cable to EJU44050
Replacing the fuses
the positive (+) battery terminals of both
If a fuse is blown, replace it with the proper
batteries.
fuse.
(2) Connect one end of the negative (–)
jumper cable to the negative (–) battery 1 2
terminal of the booster battery.
(3) Connect the other end of the negative (–)
jumper cable to an engine hanger.
2 1
3

4
1 Good fuse
2 Blown fuse

1 2
1 Positive (+) jumper cable
2 Booster battery
3 Negative (–) jumper cable
4 Engine hanger
(4) Start the engine, and then disconnect the
jumper cables by reversing the steps
above. (See page 33 for information on
starting the engine.)
1 Good fuse
2 Blown fuse
To replace a fuse:
(1) Remove the seats and removable water-
tight storage compartment. (See page 48
for seat removal and installation proce-
dures and page 53 for information on the
removable watertight storage compart-
ment.)

100