Page 47 - LIT-18626-12-14
P. 47

UF4E13E0.book  Page 42  Friday, April 27, 2018  2:35 PM



                                                                  Watercraft operation

                        EJU37029                                 three times quickly and the digital speed-
                        Cruise assist
                                                                 ometer display starts blinking, the cruise
                        The cruise assist is a function for maintaining
                                                                 assist is activated. When the cruise as-
                        a desired engine speed within a fixed range
                                                                 sist is activated, slowly squeeze  the
                        while operating the watercraft.
                                                                 throttle lever to keep it squeezed further
                        TIP:                                     than the position at which the cruise as-
                         The cruise assist can only be set between  sist was set; releasing the throttle lever
                          engine speeds of approximately 3000    will deactivate the cruise assist.
                          r/min and approximately 7000 r/min.
                                                              TIP:
                         The cruise assist cannot be activated in the
                                                              The digital speedometer display blinks con-
                          Low  RPM  Mode. (See page  39 for Low
                                                              tinually  while the cruise assist is activated.
                          RPM Mode activation procedures.)
                                                              Make sure that the beeper has sounded and
                        Activating and deactivating the cruise as-
                        sist                                  the  digital speedometer display  is blinking
                        Activation of  the  cruise assist will be con-  before squeezing the throttle lever to the full
                                                              throttle position. If the speedometer display is
                        firmed by the number of beeps when the
                                                              not blinking, the cruise assist is not activated
                        “SET” switch,  cruise assist up switch,  or
                        cruise assist down switch is pushed, and by
                        the digital speedometer display of the multi-
                        function information center. (See page 44 for
                        information on the multifunction information
                        center.)
                                                    Digital
                         Number   Cruise assist opera-
                         of beeps       tion      speedome-
                                                   ter display
                                                    Starts
                                      Activated
                                                    blinking
                                                    Stops
                                     Deactivated
                                                    blinking
                                  Set engine speed in-  Continues
                                  creases or decreases  blinking
                        TIP:
                        The beeps and the blinking digital speedom-
                        eter display also indicate the activation of the
                        no-wake mode. (See page 40 for information
                        on the no-wake mode.)
                        To activate the cruise assist:
                        (1) Operate the throttle lever until the de-
                            sired engine speed is reached.
                        (2) When the engine speed reaches the de-
                            sired cruise assist  setting, push the
                            “SET” switch. Once the beeper sounds


                                                                                               42
   42   43   44   45   46   47   48   49   50   51   52