Page 50 - LIT-18626-12-15

UF4G13E0.book Page 45 Friday, April 27, 2018 3:10 PM

Instrument operation

By switching the display units, the speed can The outer numbers × 1000 r/min and display
be shown in kilometers per hour “km/h” or segments on the meter show the engine
miles per hour “MPH”. speed.
TIP:
“MPH” is selected as the display unit at the
Yamaha factory.
To switch the speedometer display units:
Start the engine, stop the engine, and then
push the engine stop switch 3 times, pushing
the switch for 0.4 seconds or more each time,
before the multifunction information center
turns off. The speedometer display units 1
change.
1 Tachometer
To switch the speedometer display units
EJU43891
again, repeat this procedure. Shift indicator (VX / VX Deluxe /
VX Cruiser / VX Limited)
This indicator shows the reverse gate shift
positions: “F” (forward), “N” (neutral), and “R”
(reverse). (See page 37 for shifting proce-
dures.)

1
2
1 Engine stop switch
3

4
1
1 Shift indicator
2 “F” (Forward position)
3 “N” (Neutral position)
4 “R” (Reverse position)
EJU31515
Fuel level meter
1
The fuel level meter shows the amount of fuel
1 Speedometer
remaining in the fuel tank. The amount of re-
EJU31464 maining fuel is shown using eight display
Tachometer
The tachometer shows the engine speed. segments, which disappear two at a time as
the fuel level decreases.

45