Page 76 - LIT-18626-12-15

UF4G13E0.book Page 71 Friday, April 27, 2018 3:10 PM

Pre-operation checks

Securely install the stern drain plugs by tight- running. (See page 35 for information on the
ening them until they stop. cooling water pilot outlet.)

1

1 Stern drain plug
EJU32715
Multifunction information center check
EJU43810
Hood check Make sure that the multifunction information
Push down the hood latch and make sure center operates properly. (See page 44 for in-
that it is securely closed. formation on proper operation of the multi-
function information center.)

EJU40146
Post-launch checks
EJU43392
Perform the post-launch checks in the pre- Shift system check (VX / VX Deluxe /
operation checklist while the watercraft is in VX Cruiser / VX Limited)
the water and the engine is running. Operate the throttle lever and RiDE lever, and
To perform the post-launch checks: check that the watercraft moves or does not
(1) Launch the watercraft. (See page 74 for move according to the displayed shift indica-
information on launching the watercraft.) tor. (See page 37 for shift system operation
(2) Perform the checks and make sure that procedures.) WARNING! To avoid colli-
there are no malfunctioning items or oth- sions, operate at safe speeds and keep a
er problems.
EJU40553
Cooling water pilot outlet check
Make sure that water is discharged from the
cooling water pilot outlet while the engine is

71