Page 80 - LIT-18626-12-15

UF4G13E0.book Page 75 Friday, April 27, 2018 3:10 PM

Operation

the jet intake, causing impeller dam- engine. (See page 33 for information on
age and engine overheating. [ECJ00473] operating the start switch.)

(3) Attach the engine shut-off cord (lanyard) EJU32863
Stopping the engine
to your left wrist, and then attach the clip
Release the throttle lever, and then push the
to the engine shut-off switch. (See page
engine stop switch (red button) to stop the
33 for information on operating the en-
engine. WARNING! You need throttle to
gine shut-off switch.) WARNING! Check
steer. Shutting the engine off can cause
that the engine shut-off cord (lanyard)
you to hit an obstacle you are attempting
is attached correctly. If the engine
to avoid. A collision could result in severe
shut-off cord (lanyard) is not attached
injury or death. [EWJ00602]
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00582]
2
1

3
EJU32873
Leaving the watercraft
If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acci-
1 Clip
2 Engine shut-off switch
3 Engine shut-off cord (lanyard)
(4) With the throttle lever released, push the
start switch (green button) to start the

75