Page 72 - LIT-18626-12-17

UF4L10E0.book Page 67 Tuesday, July 10, 2018 1:34 PM

Operation

that the engine shut-off cord (lanyard) to avoid. A collision could result in severe
is attached correctly. If the engine injury or death. [EWJ00602]
shut-off cord (lanyard) is not attached
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00582]
2
1

EJU32873
3 Leaving the watercraft
If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acci-
dental starting or unauthorized operation by
1 Clip children or others.
2 Engine shut-off switch
3 Engine shut-off cord (lanyard)
(3) With the throttle lever released, push the
start switch (green button) to start the
engine. (See page 31 for information on
operating the start switch.)

EJU43411
Operating the watercraft
When the throttle lever is squeezed, the “F”
(forward) shift indicator will be displayed and
the watercraft will move forward. While the
“F” (forward) shift indicator is displayed, the
watercraft will move forward at trolling speed
EJU32863 even if the throttle lever is in the fully closed
Stopping the engine
Release the throttle lever, and then push the
engine stop switch (red button) to stop the
engine. WARNING! You need throttle to
steer. Shutting the engine off can cause
you to hit an obstacle you are attempting

67