Page 90 - LIT-18626-12-17
P. 90

UF4L10E0.book  Page 85  Tuesday, July 10, 2018  1:34 PM



                        Maintenance


                                                               Initial    Thereafter every
                                                                               100    200
                                                                     50 hours
                               Item             Operation              or 12   hours or  hours or   Page
                                                              10 hours         12      24
                                                                      months
                                                                        *1   months  months
                                                                               *1      *1
                                          Check breather hose and
                         Breather hose                                          √            —
                                          clamps
                                          Check for bends, dam-
                         Impeller                                               √            —
                                          age, and foreign material
                                          Check movement, and lu-
                         Jet thrust nozzle                                      √            —
                                          bricate
                                          Check hoses for clogs
                                          and damage, check
                         Jet vacuum bilge                                       √            —
                                          clamps, and clean bilge
                                          strainer
                         Stern drain plugs  Check O-rings                       √            —
                                          Check for corrosion, and
                         Anode                                                        √ *2   —
                                          clean
                         Valve clearance  Check and adjust                            √ *2   —
                                          Check for cracks, inden-
                         Rubber coupling  tations, looseness, and                      √     —
                                          noise
                                          Check for damage and
                         Engine mount                                                  √     —
                                          peeling
                        *1: Whichever comes first.
                        *2: Check every 200 hours.
                        Perform the pre-operation checks and  post-operation checks  before  performing  periodic
                        maintenance.
























                        85
   85   86   87   88   89   90   91   92   93   94   95