Page 46 - LIT-18626-12-57

UF3P13E0.book Page 40 Monday, June 24, 2019 1:32 PM

Watercraft operation

EJU40002
Watercraft operation modes Number of Low RPM Mode “L-MODE”
beeps operation indicator
light
EJU36787
Low RPM Mode Activated Comes
on
The Low RPM Mode is a function that limits
Deactivated Goes off
the maximum engine speed to approximately
70% of the maximum engine speed in the
TIP:
normal mode.
If the remote control transmitter is operated
The Low RPM Mode can only be activated
while the multifunction information center is
and deactivated by operating the remote
in the standby state, the center performs the
control transmitter that is included with this
initial operation, and then the setting is se-
watercraft. (See page 30 for information on
lected.
the remote control transmitter.)
To activate the Low RPM Mode:
Push the “L-Mode” (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the “UNLOCK” indicator light blinks
three times, then comes on, the “L-MODE”
indicator light comes on and the Low RPM
Mode is activated.
TIP:
If the Low RPM Mode is activated immediate-
1 Remote control transmitter ly after the information display turns off, the
“L-MODE” indicator light will not come on.
TIP:
The Low RPM Mode can only be activated
when the engine is stopped in the unlock
mode of the Yamaha Security System.
Activating and deactivating the Low RPM
Mode
Activation of the Low RPM Mode will be con-
firmed by the number of beeps when the re-
mote control transmitter is operated, and by
the “L-MODE” indicator light of the multifunc-
tion information center. (See page 42 for in-
formation on the multifunction information
center.)

40