Page 73 - LIT-18626-12-57

UF3P13E0.book Page 67 Monday, June 24, 2019 1:32 PM

Pre-operation checks

right and left fully turned positions of the jet lever returns automatically to its fully closed
thrust nozzle. position when released.

EJU42181
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.

EJU40113
Remote control transmitter check
Difference between fully turned posi- Make sure that the remote control transmitter
tions of jet thrust nozzle (distances A
and B): operates properly. (See page 31 for Yamaha
Maximum 5 mm (0.20 in) Security System setting procedures and
page 40 for Low RPM Mode activation pro-
EJU43213 cedures.)
RiDE lever checks
EJU32664
Operate the RiDE lever several times to make Engine shut-off cord (lanyard) check
sure that operation is smooth throughout the Make sure that the engine shut-off cord (lan-
whole range. Also, make sure that the RiDE yard) is not damaged. If the cord is damaged,
replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan-

67