Page 63 - LIT-18626-12-58

UF2W16E0.book Page 57 Monday, June 24, 2019 1:57 PM

Operation and handling requirements

Yamalube the best choice for your Yamaha (3) Remove the dipstick and wipe it clean.
engine.

1

Checking the engine oil level
EWJ00341
WARNING
1 Dipstick
Engine oil is extremely hot immediately af-
(4) Insert the dipstick back into the dipstick
ter the engine is turned off. Coming in con-
tube completely. Remove the dipstick
tact with or getting any engine oil on your
again and make sure that the engine oil
clothes could result in burns.
level is between the minimum and maxi-
ECJ01002 mum level marks.
NOTICE
Make sure that debris and water do not
enter the oil filler hole. Debris and water in
the engine oil can cause serious engine
damage.
1
To check the engine oil level:
2
(1) Place the watercraft in a precisely level
position on land with the engine
stopped. If the engine was running, allow
the engine oil to settle by waiting 5 minu- 1 Maximum level mark
tes or more before checking the oil level. 2 Minimum level mark
(2) Remove the seats. (See page 47 for seat
(5) If the engine oil level is significantly
removal and installation procedures.)
above the maximum level mark, consult
a Yamaha dealer. If the engine oil level is
below the minimum level mark, add en-
gine oil.

57