Page 80 - LIT-18626-12-58

UF2W16E0.book Page 74 Monday, June 24, 2019 1:57 PM

Operation

(3) Attach the engine shut-off cord (lanyard) EJU32863
Stopping the engine
to your left wrist, and then attach the clip
Release the throttle lever, and then push the
to the engine shut-off switch. (See page
engine stop switch (red button) to stop the
32 for information on operating the en-
engine. WARNING! You need throttle to
gine shut-off switch.) WARNING! Check
steer. Shutting the engine off can cause
that the engine shut-off cord (lanyard)
you to hit an obstacle you are attempting
is attached correctly. If the engine
to avoid. A collision could result in severe
shut-off cord (lanyard) is not attached
injury or death. [EWJ00602]
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00582]
1 2

EJU32873
3 Leaving the watercraft
If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acci-
1 Clip
dental starting or unauthorized operation by
2 Engine shut-off switch
children or others.
3 Engine shut-off cord (lanyard)
(4) With the throttle lever released, push the
start switch (green button) to start the
engine. (See page 32 for information on
operating the start switch.)

EJU43411
Operating the watercraft
When the throttle lever is squeezed, the “F”
(forward) shift indicator will be displayed and
the watercraft will move forward. While the
“F” (forward) shift indicator is displayed, the
watercraft will move forward at trolling speed
even if the throttle lever is in the fully closed

74