Page 66 - LIT-18626-12-60

UF4L11E0.book Page 60 Monday, June 24, 2019 2:27 PM

Pre-operation checks

right and left fully turned positions of the jet lever returns automatically to its fully closed
thrust nozzle. position when released.

EJU42181
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.

EJU32664
Engine shut-off cord (lanyard) check
Difference between fully turned posi- Make sure that the engine shut-off cord (lan-
tions of jet thrust nozzle (distances A
and B): yard) is not damaged. If the cord is damaged,
Maximum 5 mm (0.20 in) replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
EJU43213 together. The engine shut-off cord (lan-
RiDE lever checks
yard) may not pull free when the operator
Operate the RiDE lever several times to make
sure that operation is smooth throughout the
whole range. Also, make sure that the RiDE

60