Page 68 - LIT-18626-12-60

UF4L11E0.book Page 62 Monday, June 24, 2019 2:27 PM

Pre-operation checks

er dealer to obtain one meeting the proper flood the engine compartment and cause
specifications. the watercraft to submerge. [ECJ00363]
Fire extinguisher:
Classification:
B-1
Capacity:
2 lb or more

EJU40122
Safety equipment check
Check that safety equipment meeting the ap-
plicable regulations is on board. 2
EJU32353 1
Hull and deck check 1 Stern drain plug
Check the hull and deck for damage or other 2 O-ring
problem.
Securely install the stern drain plugs by tight-
EJU32657
Jet intake checks ening them until they stop.
Make sure that the jet intake is not damaged
or clogged with weeds or debris. If the jet in-
take is clogged, clean it. (See page 90 for in-
formation on the jet intake.)
EJU43221
Jet thrust nozzle and reverse gate check
Check the jet thrust nozzle and reverse gate 1
for damage or other problem.
EJU44250
Stern drain plug checks
Loosen the stern drain plugs and remove
them, and then make sure that the plugs and 1 Stern drain plug
O-rings on the plugs are not damaged and EJU44640
Hood check
that there is no foreign material on the
threads or O-rings on the plugs. NOTICE: Close the hood, hook the hood latches, and
check that the hood is securely closed.
Before installing the stern drain plugs,
clean the drain plug threads and the O-
rings on the plugs to remove any foreign
materials, such as dirt or sand. Otherwise,
the stern drain plugs could be damaged,
allowing water to enter the engine com-
partment. Check the O-rings on the stern 1
drain plugs and make sure that the plugs
are tightened securely before launching
the watercraft. Otherwise, water may
1 Hood latch

62