Page 48 - LIT-18626-12-62

UF3X11E0.book Page 42 Thursday, July 4, 2019 2:27 PM

Watercraft operation

(2) Tap the drive control mode indicator on To operate the watercraft using the drive con-
the multifunction information center. trol mode:
(3) If the drive control mode screen is (1) Release the throttle lever and let the en-
locked, the PIN entry screen will be dis- gine speed return to idle.
played. Flick up or down to set each digit (2) Activate the drive control mode.
of the 4-digit PIN, and then tap the “En- (3) Squeeze the throttle lever. The water-
ter” button. If the drive control mode craft will accelerate according to the se-
screen is not locked, the screen shown in lected acceleration setting up to the
step 4 will be displayed. selected maximum watercraft speed set-
ting.
TIP:
Enter PIN If the throttle lever is squeezed to a level less
9 9 9 9 than the selected acceleration setting, the
0 0 0 0 watercraft will accelerate according to the
1 1 1 1 throttle lever operation instead of the select-
Enter ed acceleration setting.
Selecting the drive control mode settings
The drive control mode settings for the maxi-
mum watercraft speed and acceleration are
(4) Tap the “ON” button. Once the beeper saved. In addition, the activation and settings
sounds three times and “ ” is displayed of the drive control mode can be locked to
in light blue, the drive control mode is ac- prevent others from changing them.
tivated. When the drive control mode is locked, a PIN
must be entered to operate the drive control
mode screen.
Drive Control To select the maximum watercraft speed and
acceleration settings:
ON OFF (1) Perform steps 1–3 in “To activate the
drive control mode”.
Settings Lock (2) Tap the “Settings” button.
(3) Flick up or down to select the maximum
watercraft speed setting under “Speed”

To deactivate the drive control mode:
(1) Perform steps 1–3 in “To activate the
drive control mode”.
(2) Tap the “OFF” button. The beeper
sounds two times and “ ” is displayed
in black when the drive control mode is
deactivated.

42