Page 67 - LIT-18626-12-62

UF3X11E0.book Page 61 Thursday, July 4, 2019 2:27 PM

Equipment operation

EJU42391 hood is securely closed before using the
Fire extinguisher holder and cover
watercraft.
The fire extinguisher holder and cover are lo-
cated in the bow storage compartment.
To use the fire extinguisher holder and cover:
(1) Pull the hood latch rearward, and then lift
up the rear of the hood.
1

EJU45291
Optional part mounting bracket
A mounting bracket for installing optional
parts is located near the port (left) side of the
multifunction information center.
1 Hood latch
(2) Unhook the band and remove the fire ex-
1
tinguisher cover.

1

2
1 Optional part mounting bracket
Load limit:
1.0 kg (2.2 lb)
1 Fire extinguisher holder and cover
2 Band
(3) Place the fire extinguisher in the holder,
and then place the cover over the fire ex-
tinguisher.
(4) Securely fasten the cover and the fire ex-
tinguisher with the band.
(5) Push the rear of the hood down to se-
curely lock it in place. Make sure that the

61