Page 46 - LIT-18626-12-63

UF4E14E0.book Page 40 Wednesday, July 17, 2019 4:21 PM

Watercraft operation

craft operation or when the watercraft is in in the fully closed (idle) position when the
neutral. no-wake mode is activated.
TIP: TIP:
 The no-wake mode can only be activated The digital speedometer display blinks con-
after 5 seconds have elapsed since starting tinually while the no-wake mode is activated.
the engine.
 If the no-wake mode is activated when the
watercraft is operating in neutral, the re- 1
verse gate will move to the forward posi-
tion.
Activating and deactivating the no-wake
mode
Activation of the no-wake mode will be con-
firmed by the number of beeps when the
“NO-WAKE MODE” switch is pushed, and by
the digital speedometer display of the multi- 1 “NO-WAKE MODE” switch
function information center. (See page 43 for
information on the multifunction information
center.)

Digital
Number No-wake mode oper-
of beeps ation speedome-
ter display
Starts
Activated
blinking
Stops
Deactivated
blinking
TIP: To deactivate the no-wake mode:
The beeps and the blinking digital speedom- Perform one of the following operations. The
eter display also indicate the activation of the beeper sounds two times quickly and the dig-
cruise assist. (See page 41 for information on ital speedometer display stops blinking when
the cruise assist.) the no-wake mode is deactivated.
To activate the no-wake mode:  Push the “NO-WAKE MODE” switch.
(1) Release the throttle lever and let the en-  Squeeze the throttle lever.
gine speed return to idle.  Squeeze the RiDE lever.
(2) Push and hold the “NO-WAKE MODE”
TIP:
switch. Once the beeper sounds three
The no-wake mode is also deactivated when
times quickly and “8” (when kilometers
the engine is stopped.
are selected) or “5” (when miles are se-
lected) starts blinking in the digital
speedometer display, the no-wake
mode is activated. Keep the throttle lever

40