Page 49 - LIT-18626-12-63

UF4E14E0.book Page 43 Wednesday, July 17, 2019 4:21 PM

Instrument operation

EJU43760 their state before the center turned off, and
Multifunction information
then the center starts to operate normally.
center EJU35027
Information display
The multifunction information center displays
The information display shows watercraft op-
various watercraft information.
erating conditions.
1 2 3
1 2

4
1 “UNLOCK” indicator light 3 4 5 6 7 8
1 Tachometer
2 Information display
2 Speedometer
3 “L-MODE” indicator light
3 Oil pressure warning indicator
4 “WARNING” indicator light
4 Engine overheat warning indicator
Multifunction information center initial op-
5 Check engine warning indicator
eration
6 Shift indicator
When the multifunction information center is
7 Fuel level warning indicator
activated, all of the display segments come 8 Fuel level meter
on. After 2 seconds, the warning indicators in
EJU43832
the information display go off, and then the Speedometer
center starts to operate normally. The speedometer shows the watercraft
If only the multifunction information center is speed against water.
activated, the “WARNING” indicator light
blinks once.
TIP:
The “UNLOCK” indicator light also comes on
as part of the initial operation.
The “UNLOCK” indicator light will go off
when the engine is started.
Multifunction information center standby
state
If the multifunction information center does 1
1 Speedometer
not receive any operation input within 25 sec-
onds after the engine stops, the center will By switching the display units, the speed can
turn off and enter a standby state. When the be shown in kilometers per hour “km/h” or
engine is started again, the displays return to miles per hour “MPH”.

43