Page 36 - LIT-18626-12-64

UF4G14E0.book Page 30 Wednesday, July 10, 2019 11:14 AM

Control function operation

EJU31026 in the transmitter holder in the glove compart-
Watercraft control functions
ment, so that it is not lost.
EJU43910
Remote control transmitter 1
(VX Deluxe / VX Cruiser / VX Limited)
The Yamaha Security System and Low RPM
Mode settings can be selected by operating
the remote control transmitter. (See page 31
for Yamaha Security System setting proce-
dures and page 38 for Low RPM Mode acti-
vation procedures.)

1 Transmitter holder
ECJ00753
NOTICE
 The remote control transmitter is not
completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If the transmitter is
submerged, dry it with a soft, dry cloth,
1 Remote control transmitter and then check that it is operating prop-
Since the watercraft is programmed to rec- erly. If the transmitter is not operating
ognize the internal code from this transmitter properly, contact a Yamaha dealer.
only, the settings can only be selected with  Keep the remote control transmitter
this transmitter. away from high temperatures and do
If you accidentally lose your remote control not place it in direct sunlight.
transmitter or if it is not operating properly,  Do not drop the remote control trans-
contact a Yamaha dealer. mitter, subject it to strong shocks, or
When operating the watercraft, always keep place any heavy items on it.
the transmitter with you, such as by storing it  Use a soft, dry cloth to clean the remote
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
 Do not attempt to disassemble the re-
mote control transmitter yourself. Oth-
erwise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer. Refer
to local hazardous waste regulations
when disposing of transmitter batteries.

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following

30