Page 37 - LIT-18626-12-64

UF4G14E0.book Page 31 Wednesday, July 10, 2019 11:14 AM

Control function operation

two conditions: (1) this device may not cause
“UN-
harmful interference, and (2) this device must Number of Yamaha Security LOCK” in-
accept any interference received, including beeps System mode dicator
light
interference that may cause undesired oper-
ation. Lock Goes off
ECJ00031 Unlock Comes
NOTICE (normal operation on
mode)
Changes or modifications not expressly
Unlock Comes
approved by the party responsible for (Low RPM Mode) on
compliance could void the user’s authority
to operate the remote control transmitter. TIP:
 The beeper sounds two times for the nor-
EJU31385
Yamaha Security System (VX Deluxe / mal operation mode or three times for the
VX Cruiser / VX Limited) Low RPM Mode. (See page 38 for Low
The Yamaha Security System functions to RPM Mode activation procedures.)
help prevent unauthorized use or theft of the  If the remote control transmitter is operated
watercraft. The lock and unlock modes of the while the multifunction information center
security system can be selected by operating is in the standby state, the center will per-
the remote control transmitter that is included form the initial operation, and then the set-
with this watercraft. The engine cannot be ting is selected.
started if the lock mode of the security sys- To select the lock mode:
tem is selected. The engine can only be start- Push the lock button on the remote control
ed if the unlock mode is selected. (See page transmitter briefly. The beeper sounds once
30 for information on the remote control and the “UNLOCK” indicator light blinks
transmitter.) once, then goes off. This indicates the lock
mode is selected.
TIP:
The Yamaha Security System settings can 2
1
only be selected while the engine is stopped.
EJU36776
Yamaha Security System settings
The Yamaha Security System settings will be
confirmed by the number of beeps when the
remote control transmitter is operated, and
by the “UNLOCK” indicator light of the multi-
function information center. (See page 43 for
information on the multifunction information
center.) 1 Lock button
2 “UNLOCK” indicator light
To select the unlock mode:
Push the “L-Mode” (unlock) button on the re-
mote control transmitter briefly. The beeper
sounds two or three times and the “UN-

31