Page 45 - LIT-18626-12-64

UF4G14E0.book Page 39 Wednesday, July 10, 2019 11:14 AM

Watercraft operation

The “L-MODE” indicator light will come on
“L-MODE”
Number of Low RPM Mode indicator when the engine is started.
beeps operation
light
Comes
Activated
on
Deactivated Goes off
1 L-Mode
TIP:
If the remote control transmitter is operated
while the multifunction information center is
in the standby state, the center performs the
initial operation, and then the setting is se-
lected. 1 “L-Mode” (unlock) button
To activate the Low RPM Mode:
Push the “L-Mode” (unlock) button on the re- 1 2
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds three times
and the “UNLOCK” indicator light blinks
three times, then comes on, the “L-MODE”
indicator light comes on and the Low RPM
Mode is activated.
TIP:
If the Low RPM Mode is activated immediate-
ly after the information display turns off, the 1 “UNLOCK” indicator light
“L-MODE” indicator light will not come on. 2 “L-MODE” indicator light
To deactivate the Low RPM Mode:
Push the “L-Mode” (unlock) button on the re-
mote control transmitter for more than 4 sec-
onds. Once the beeper sounds two times and
the “UNLOCK” indicator light blinks two
times, then comes on, the “L-MODE” indica-
tor light goes off and the Low RPM Mode is
deactivated. When the Low RPM Mode is de-
activated, the watercraft returns to the nor-
mal operation mode.
EJU42484
No-wake mode (VX Deluxe /
VX Cruiser / VX Limited)
The no-wake mode is a function that main-
tains the engine speed at a fixed setting for
operating the watercraft at low speeds. This
function can be used only for forward water-

39